EaseLife 6.6 FT Stainless Steel Sliding Barn Door Hardware Track Kit,Heavy Duty,Anti-Rust Anti-Corrosion,Slide Smoothly Quietly,Easy Install (6.6FT Track Kit for 36″~40″ Single Door)

Great love it
I love how smooth the door slides. The stainless steel is beautiful. I had an issue with one mounting bracket and reached out to the manufacturer, they sent me a new one no problem. Great to work with. It should be noted that the install is a little challenging with the 2 pcs rod. However if you have experience and a good level you will be fine.

Good quality hardware; detailed installation instructions would have been really helpful.
Hardware is solid (quite heavy), well made, and seems like it would last. Rollers operate smoothly, and installation is relatively straightforward even though there were no printed instructions included with the parts. A few suggestion (i.e. what I learned from my mistakes):- be really certain whether you want a single or double sliding door kit when you place your order, as spare/additional parts are impossible to obtain. I originally thought I would go with a single wide sliding door, so ordered an 8′ single door kit. Realized after receiving the kit that I really need double doors. Since I couldn’t order additional parts, I ended up ordering a second kit (figuring I could combine the two sets of rollers on a single track). Was surprised to find that the rollers from the first and second kits accomodate different width doors, had different spacer sets (which are needed to adjust the alignment of the door relative to the rail on which the rollers slide). I was so frustrated that I initiated return procedures for the second order, at which point I was able to get in touch w/the seller and explain the reason for return. To his credit, seller immediately sent me another set of rollers so I can get matching sets for 2 sliding doors. Would have been much better if I knew exactly what configuration I needed before placing the order for the first set.- on the topic of spacers needed for door alignment, this is worth spending some time sketching out on paper before ordering parts or drilling holes in the wall. A professional installer would know all this already, but for a do-it-yourself project, it took me a few tries to figure it out. Originally, I wanted the door to hang directly underneath the rail. But the brackets which secure the rail to the wall end up leaving very little clearance between the rail and the wall (< 1/2", roughly). So if you want to hang a thicker door panel (mine was 1 3/4" thick), there may not be enough space between the door and the wall (especially if you have thick baseboards at the bottom of the wall). Add to that the fact that I received two styles of rollers (from the two different orders I placed) - one style seems more appropriate for sliding glass doors (which are usally thinner than 1/2") which have no spacer between the roller wheel and the arm that is attached to the glass panels, and another style for sliding wood doors (which are typically 1 1/8" to 1 3/4" thick) which have a thicker spacer between the roller wheel and arm. I ended up having to route out an inset in my wood door in order to get the alignment to work. It turned out pretty nicely, but certainly added more work to the installation.

Well made, sturdy and glides smoothly
Works really well. Glides great and our door is very heavy with 4 glass inserts.We did not need to install in a board. Works well with our trim using the 3 spacers provided. Just make sure you have clearance with the door pull on the back side.The brackets can be positioned where you need them. That’s a great feature.The finish isn’t quite as shiny as shown -but it’s nice. I’d prefer chrome to match other features but t works well.

Good looking rail system
Get a laser level if possible. The two piece rail will look crooked if misdrilled. The directions are semi helpful. Lots of measurements are needed for best fit and placement of rail supports depending on door dimensions. I love the clean look and it slides very smoothly even with a heavy door.

Bearings are Noisy anybody solve this problem?