ECHOGEAR SlimView TV Wall Mount for 32″ to 80″ TVs – 1.25″ Low Profile with Pull String Locking System for Cable Access & Included Hardware for DIY Easy Install

great construction, easy to install, excellent customer service
This is a fantastic TV mounting bracket at an excellent price! I wanted a slim-profile bracket that would hold our new 65″ LED HDTV. I ordered the ECHOGEAR Low Profile Fixed TV Wall Mount Bracket (for 32″-80″ TV’s), priced at $29.99. (Similar items were listed at over $100 at other big-box electronics-type stores.) This ECHOGEAR product is GREAT! The bracket consists of two heavy-gauge metal pieces that overlap and screw into the wall. Then there are two heavy-gauge metal braces, which each get screwed into the back of the TV, and can then be clipped onto the wall bracket. It arrived promptly with clear instructions and lots of different-sized screws to accommodate different TV manufacturers and bolts for attachment to studs through drywall. (There were instructions for mounting through concrete/cement, but we would have had to go and purchase the bolts/anchors they told you to get, so that would have been a bit of an aggravation if we were ready to mount then discovered we needed to go out and purchase additional tools.) Turns out the screw type and length we needed was one of the only type/size that WASN’T included in the package, but ECHOGEAR customer service was very responsive and said they’d mail out the necessary four screws to us right away. [Update: we were impatient to mount our new TV, and the screws from ECHOGEAR hadn’t yet arrived after 1 week, so we were going to go to the hardware store and buy them ourselves, but it turns out those four screws we needed were included with the TV! ]Attaching the bracket to our studs through drywall was a BREEZE. (You will need to have a reliable stud-finder, however.) The bolts provided for bracket attachment to the studs were very large and solid/sturdy. Once the bracket was attached to the wall, and the braces were screwed into the holes in the back of the TV housing, it was so easy to clip/slide the TV over and onto the wall bracket. The TV can be slid on the bracket (on the wall) side-to-side for purposes of fine-tune centering adjustment horizontally once the TV is clipped onto the wall bracket, but there is no movement possible vertically or pivoting once the wall bracket is screwed in. (Note, as we’re discussing this, this might be a bit of a potential design flaw; in theory, if the wall bracket wasn’t secured close enough to center and you tried to make up for it by sliding the TV over, one could actually slide the TV off the bracket! That being said, we had at least 12 inches on either side of where our braces sit on the bracket, but we are thinking we might stick some putty or clay on the ends of the wall bracket to avoid an inadvertent disaster, should the cleaners or a painter decide to nudge the TV to the side!)The quick-release loops are a nice feature, and those we taped up with painter’s masking tape to hide but maintain access. (Depending on where on the screw-hole/supports are located on the back of the TV, the loops may already be hidden by the bottom part of the TV. On the same TV in 55″, the support bracket across the back of the TV was more in the middle of the TV; I think for the larger 65″, the support bracket is lower due to center of gravity and stability.) The bracket does hold the TV against the wall with a very slim profile, but there’s still 2.5″ clearance so that HDMI and audio ports could be accessed, if necessary.All in all, very happy with my purchase. Would highly recommend.

I love it
I love this wall mount. Great price, very simple low profile fixed mount. Frame is well finished, no “ginsu” edges. Very substantial and sturdy, lots of mounting screws included for all kinds of different televisions and easy as can be to install. Latching pull strings are nice, made it easy to pull set off wall.Ran into a slight problem when centering the mount on wall. My TV is 70″ using 400×400 vesa pattern with 16″ center to center stud spacing. TV takes up virtually all available horizontal space on wall (61″ 3/4 TV vs. ~64″ wall) and so centering the mount perfectly was a major concern. Due to an unlucky stud configuration relative to center of wall it was not possible to mount in the center and horizontal slide action to compensate after TV was mounted came up a little over an inch short on allowing TV to be perfectly centered on wall. Still turned out great and TV does not extend past the wall edge so I’m a happy camper.. Just wish this mount was two inches wider.

Excellent low profile, fixed TV mount. I mounted a 60″ flat screen in our media room and it took me all of 30 minutes. Very solid and easy to mount TV once installed. Would highly recommend.

it’s very well made, and easy to install. my only issue is that i have the mount installed perfectly level (measurements from the top of mount to the top of my tv enclosure are exactly the same on the left and the right). however, my tv is off a quarter inch between the left and right sides (height). the bracket holes (for the back of the tv) have a bit of play so i should be able to adjust a bit. it’s a small thing to complain about and i should be able to get it perfectly straight with some fiddling. also, when my tv is mounted it tilts up a small amount. not the fault of the mount so i’ll just have to undo the top screws a bit to allow it to pull forward a little amount. still, very happy with this mount, super cheap and well made.