Comments on: FeelAtHome Twin to King Bed Converter Kit – Bed Bridge – Twin Bed Connector King Maker – Twin & Twin XL Bed Connector to King – Twin Bed Mattress Connector Bridge – King Bed Conversion Kit (8″ Class)

By: Kevin salvador reyes moreno

Kevin salvador reyes moreno — Fri, 07 Mar 2025 10:24:48 +0000

Muy buena opcion si quieres que no se separe cuando tienes dos colchones individuales…

By: SextoysReviews

SextoysReviews — Fri, 07 Mar 2025 10:24:48 +0000

The mattress filler is soft and seems durable. So does the belt. Overall it does exactly what it says: it hold the beds together and fills perfectly.Since the edges of the mattress filler are on the mattresses, there is a little bump that can be noticeable at first, but you have to ask yourself “Do I rather sleep in a hole or on a tiny bump?” We chose the tiny bump and are happy with it 🙂

By: Luc Voivoditch

Luc Voivoditch — Fri, 07 Mar 2025 10:24:48 +0000

TrÃ¨s pratique, pas trop compliquÃ© Ã installer.

By: michelle t.

michelle t. — Fri, 07 Mar 2025 10:24:47 +0000

Perfect for Two Queen Mattresses
I was initially hesitant to purchase this bed bridge kit, as it’s advertised for two twin mattresses, and I wanted to use it to combine two queen-sized mattresses. However, the kit exceeded my expectations and worked great. The strap fit perfectly, and I was able to securely connect the two queen mattresses, creating a comfortable and sturdy large bed. I would recommend it to others looking to merge two queen mattresses into one.

By: K. Ballantyne

K. Ballantyne — Fri, 07 Mar 2025 10:24:47 +0000

Wasn’t exactly what I thought it was, but with a little tweaking, works perfectly.
I have 2 x twin XL beds that form a large King sized single bed.Now, normally I have 2 x sets of twin XL sheets on the bed (with a large single duvet cover).I bought the “premium” version and the straps on this run across the top and bottom of the mattresses and go under the mattresses and then tighten like a belt on the sides,The only problem with this method is there is NO WAY to install the single sets of sheets with this method.I would either have to return the pad and get a different closing/tightening method (the other products have a strap to hold the mattresses together by wrapping around the outside of both mattresses), or just buy a single set of King sheets (because THEN I can install the straps, then put the3 fitted sheet over the straps).I mean the purpose of doing this was so I could have a large single king bed when I wanted it, so the buying of the single king set of sheets seemed to be the best solution here.That all said, there is about a 1″ difference in height of the 2 x mattresses, which I was concerned about, but this thing seems to somehow even them out too, so the transition is all but transparent.Solid product though. Especially when I didn’t know something like this even existed.All in all, well worth the money,

By: LaurenDFilm

LaurenDFilm — Fri, 07 Mar 2025 10:24:47 +0000

Does the job and isnât noticeable
I was a bit hesitant in ordering this for my adjustable base split king due to the mixed reviews, but decided to give it a try and Iâm so glad I did! The 12â version fits the gap perfectly with no discernible edge and the feel is seamless. The strap that it comes with to go around the bed is absurdly long, but better than being too short – it does not affect the beds ability to adjust. I do also use a horizontal bed bridge that I had gotten before this, but didnât do the job on its own. Together, you canât even tell that itâs a split king anymore. Highly recommend.

By: Twdgomez

Twdgomez — Fri, 07 Mar 2025 10:24:47 +0000

Worked at first
It was nice at first, actually kept our beds together. It was def long enough to bring our two twins beds together. But the moment the bed moves even a bit, the strap comes up immediately. I thought a bed strap would mean it would have the same width of bedsheets so it’d actually keep the beds together but the fact it was only a little 2 inch strap isn’t enough. You’ll have the strap coming up so often you’ll have to eventually put it back down every other night. Even when we tightened it sm that our beds have dents in them, the strap still comes up. And it makes it even harder to squeeze the beds together and put back down. I’d rather just get a frame that holds them together in a box rather than a pathetic strap.So unless you’re looking for temporary use, it’s easier and better just to get a bed frame that has railings to keep the beds together and convert it to a king. Otherwise incredibly useless. And super frustrating

By: Bill or Tracy K

Bill or Tracy K — Fri, 07 Mar 2025 10:24:47 +0000

A well-designed strap-and-buckle that makes it easy to “join” two beds.
It came in the mail in a smaller than expected pack, ahead of schedule. I was expecting a version of a store-bought tie-down strap. Superficially, that’s what it is, but the metal buckle is ideally designed for the less demanding task of holding two beds together along the outer sides of the two beds. A 10 meter strap is NOT limited to joining only twin beds. At about 11 yards –> 33 feet –> 396 inches, other combinations of bed pairs can be joined just as easily. In my case, it was a simple twin with a super-awesome full mattress-the missus likes lots of pillows, so a King has never been enough for the both of us. In my case, I calculated that I’d have just under 5 feet of extra length of strap . Indeed, after a gentle cinching of the strap at the end of the process, my arithmetic proved correct. The included instructions were well illustrated and clearly written. After fumbling with the loose strap while initially placing it around the top of the bed, it occurred to me that if I presized the strap with the help of the really easy-to-use buckle (It’s sprung closed, with a simple thumb-push lever to let the strap through), It would be a LOT easier to keep the strap under tension while fitting it around the outer sides. Voila! The task just became easier for one person. What to do with the five extra feet? I decided to cut away three feet. The strap is woven nylon, so cutting the edge would require resealing the newly exposed end. This isn’t as safe as it sounds, since there’s a lot of bedding around., STRONGLY suggest you move it to a safe place, with a glass of water (not for drinking, but for dunking the cauterized end of the strap) and a lighter to perform the task. If you’d rather leave the excess length undisturbed, the instructions illustrate how to tuck it behind the main strap. The task of changing sheets isn’t an issue even with mismatched mattresses. The fitted sheet can easily be tucked under the strap on the three outer sides for each bed, and the top sheets tuck on the bottom and outer side in the normal way. The two topsheets then overlap on the common inner sides. If you wanted to adjoin two full-size beds (54″ width), you’d use 372 inches of the strap. That would leave you with two feet excess, an amount I highly recommend you keep. As with all straps and buckles, You always need a little surplus to give yourself a margin of error in case the strap slips a little in the buckle. Just sayin’ , two fulls tied together give you a nine-foot wide bed. With the correctly sized bedroom, that’s an impressive bed for your comfort and enjoyment. That was indeed the case for us in two of the homes we lived in.In summary, this is a high-quality product that is easy to use in order to give yourself a flexible means of using beds in your house.

By: Anne-Marie Zack

Anne-Marie Zack — Fri, 07 Mar 2025 10:24:47 +0000

Exactly as stated

By: Darrell Madill

Darrell Madill — Fri, 07 Mar 2025 10:24:47 +0000

Bought this to join two single XL single beds into a king. Seems to do the job and quite happy with is application. Will know better after a longer time. Seems sturdy and easy to install.