Comments on: Glideaway Premium Heavy Duty Bed Frame 7-Leg w/ Center

By: Brandie Whinery

Brandie Whinery — Thu, 02 Apr 2026 14:12:14 +0000

Very sturdy
I had purchased this for the framework of a water bed, the frame was very sturdy for it had held s king size water bed along with 2 wooden box frames that went under the water bed. Then after 2 years decided to purchase a regular mattress and the only thing wrong with the frame was the white plastic stoppers had cracked under the weight and some broke.

By: Adam S Irick

Adam S Irick — Thu, 02 Apr 2026 14:12:14 +0000

STLBeds
going on record to say Greg and his team at STLBeds are comitted to customer satisfaction. They took the time to contact me personally to resolve some issuse with my order and by the time we were done they had me all set up and completly happy with my order. i would deff recommend them to anyone needing quality bedding support frames and any other product they offer

By: Dj

Dj — Thu, 02 Apr 2026 14:12:14 +0000

Sturdy and Easy
Holding up very well. It was easy to assemble and it has been holding up very well to my air-frame waterbed mattress (full size). As an aside – I did add a plywood plank under the mattress to distribute the weight and prevent bulging.

By: Karla J Jensen

Karla J Jensen — Thu, 02 Apr 2026 14:12:14 +0000

GREAT SERVICE
This is exactly what we were looking for. Great Customer Service. They called to verify dimensions before they shipped to us, and helped us to get the best frame for our head and foot board.

By: mikeinaiken

mikeinaiken — Thu, 02 Apr 2026 14:12:14 +0000

leg inserts breaking
I am dropping this to 1 star from 2 stars.After 3 1/4 years of use, the plastic gliders are breaking off at the square plastic base. This is similar to what others have posted a picture of. This likely happens due to what I view as a design issue that gets exasperated if the you slide the frame on say carpet with a heavy mattress on it.The issue is a poor design in my opinion.The plastic insert the glider screws into is square and slightly tapered. The bottom of the plastic insert is wider than the top. This is a problem as this will allow the insert to rock inside the bed frame even if moving only a few inches. The metal frame where the plastic nut insert s into flares wider as you get closer to the frame than where the nut starts to press in to it This adds to the amount the nut/glider can rock. This means that when the peg is inserted the glider can rock the insert iinside the frame. This rocking motion will cause stress on the sqaure part that sits flush to the bottom of frames leg and will cause it to break at that point.This is a very cheep design where a “heavy duty” bedframe relies on a cheep plastic part that breaks easily and is of a poor design. Your product is only as good as its weakest link and this plastic nut is a very weak link.To top this off, these glider inserts are 3/4 inch diagnal 1/2 in sqaure. The standard gliders they sell are 1/2 round and do not fit. I am now in search of replacement inserts or a whole new bedrame. Which this frame has risen over 50% in price since I bought it at the end of 2022.Original – Missing Parts and missing replacement partsClearly I received a returned or previously opened box. It came with frame only and no hardware. This was received the day that a brand new king bed was delivered and I could not put the frame together for the bed. I wound up sleeping in a different smaller bed.Seller was responsive and indicated he would expedite the missing hardware. The expedited shipment was 5 days until delivery. The parts I finally got wound up only having 5 screws and not 6 screws. I had to run to the hardware store to buy the last screw needed. The legs on this are not very good like many have indicated. The inserts the feet screw into are square plastic and the feet can angle. Heavy duty would be solid steel and steel threaded.In the process of trying to find out what kind of hardware was missing since no instructions came either I called the manufacturer directly. It was explained that the unit is no longer manufactured and there was limited quantity left.Top it off, the bolts are 10/20 1/2 inch with a 1/2 inch locking screw. The feet use a metric 13mm wrench to tighten.

By: Tennessee

Tennessee — Thu, 02 Apr 2026 14:12:14 +0000

Ok at best.
The frame itself is sturdy but the feet are horrible. They fall out if you move the bed at all. There is a balancing foot/screw that screws into a piece of white plastic that does not fit tight into frame foot holes. Awful & cheap foot design.

By: PickE

PickE — Thu, 02 Apr 2026 14:12:14 +0000

Very sturdy frame.
This frame is exactly what I wanted to replace the old one I had previously. I am using it with no foot or headboard, although it comes with brackets for a headboard. Well worth the purchase. Thank you to the seller.

By: Jameela Yusuff

Jameela Yusuff — Thu, 02 Apr 2026 14:12:14 +0000

Limited screws become a safety issue
I bought the frame for a full-size bed with a head and footboard support, which fit perfectly. I would have given it a 5 stars, however the major issue is the safety of holding the headboard and footboard. It only comes with one screw for each side. I have to get the additional 16 screws that need it to secure both ends of the board. My daughter is 9 years old and I could be a hazard if they are not fully secured.