LED Flush Mount Ceiling Light Fixture, 5000K Daylight White, 12inch 24W, 3200LM, Slim Flat Panel Lighting Fixture, Square Modern Ceiling Lamp for Bedroom, Kitchen, Living Room, Closet, Stairwell
Original price was: $33.99.$24.99Current price is: $24.99.
Price: $33.99 - $24.99
(as of Feb 05, 2025 08:21:36 UTC – Details)
Product Description
12Inch 24W Flush Mount LED Ceiling Light Fixture Square 110-240V AC Input
Bingotec Indoor LED Ceiling Light
Package List:
1x LED ceiling light
1x Mounting bracket
4x Screws
4x Expansion tube
1x User Manual
Applications:
Indoor Lamp for Kitchen, Bedroom, Hallway, Corridor, Balcony, Living Room etc.
Specifications: Wattage: 24W Lumen: 3200LM IP Rate: IP40 CRI: Ra>80 Beam Angle: 120° CCT: 5000K Color: Daylight White Non-dimmable
Under one-inch Thick Ultrathin Design
0.94inch thick LED ceiling light flushes to the ceiling without the gap.
Sealed Structure
Low profile LED ceiling light with integrated sealed structure, no shadow or black spot inside the lamp after long-term use.
Mounting Bracket Size
Easy to install, 3 steps: fix ring base, connect wires & fixed.
5000K Daylight White
Non-dimmable, LED ceiling light only works with regular ON/OFF toggle switch.
Easy Installation
Fix Ring Base
1. Remove the hanging plate from the lamp body.
2. Drill mounting holes on the ceiling according to the mounting holes of the hanging plate, drive in the expansion rubber plug, and fix the hanging plate on the ceiling with screws. Ensure that the external power cord passes through the cable entry hole of the hanging board to ensure that it is firmly installed.
Connect Wires
3. Blue cable connects to “N” (null line), Brown(red) cable connects to “L” (live line). When wiring, pay attention to the good contact of the wires, and wind the insulation with electrical tape to ensure that the copper wires are not exposed.
Fixed
4. Put the lamp body on the hanging board and push it to fix it on the hanging board to make sure it is firmly installed.
Features:
● 12 inch Square LED Retrofit replacement, 240 Watts bulb equivalent light output, 24 Watts energy used. 3200LM high brightness output, energy saving of up to 90%, and long lifetime.
● Under one-inch thick round lighting fixture, flush to the ceiling without the gap.
● Low profile ceiling light with integrated sealed structure, no shadow or black spot inside the lamp after long-term use. Rated to IP40.
● 12” white modern ceiling light fixture with 120pcs high efficiency SMD2835 CRI80 LED chips, output up to 3200 lumens. LED ceiling light shines brightly, evenly, very clean soft light output, free of glare.
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.0 out of 5 stars
34
4.5 out of 5 stars
643
4.4 out of 5 stars
41
4.5 out of 5 stars
643
4.4 out of 5 stars
193
4.4 out of 5 stars
193
Price
— $19.98$19.98
— $24.99$24.99 $39.99$39.99 $37.99$37.99
Wattage
24W 24W 32W 24W 24W 24W
Size
12Inch 12Inch 15.7inch 12Inch 12Inch 12Inch
CCT
2800-6500K 5000K 5000K 5000K 5000K 5000K
Lumens
3200LM 3200LM 3800LM 3200LM 3200LM 3200LM
Shape
Round Round Round Square Square Square
Product Dimensions : 11.81 x 11.81 x 0.94 inches; 2.05 Pounds
Item model number : 613965271202
Date First Available : July 7, 2021
Manufacturer : LEDneighbor
ASIN : B098RW5DJM
Country of Origin : China
Ultra Thin Ceiling Light: 12”square LED flat panel light is 0.94 inch thick, the lamp is close to the ceiling without gap after the installation. The low profile ceiling light with integrated sealed structure, no shadow or black spot inside the lamp after long-term use. Rated to IP40
High Brightness and Flicker-free: LED ceiling light with 120 pcs high efficiency SMD2835 CRI80 LED chips, output up to 3200 lumens. Flat ceiling light shines brightly, evenly, flicker-free, very clean soft light output, free of glare
Energy Saving and Long Lifespan: 24W LED is equivalent to a traditional 240W fluorescent flush LED ceiling light, energy-saving of up to 90%. More light, less energy. The 10-year lifespan if under normal usage of 8 hours a day
Easy to Install: Only 3 steps to complete the installation, fix ring base, connect wires and fix. Non-dimmable, only works with regular ON/OFF toggle switch
Widely Used: LED flush mount ceiling light fixture is perfect for bedroom, kitchen, hallway, stairwell, living room, closet, laundry room, restroom, office, dining room, warehouse, basement, porch, corridor, garage, stair etc
What You Get: 1 pc LED Ceiling Light, 4 pcs Mounting Screws and User Manual
Customers say
Customers appreciate the light fixture for its brightness, ease of installation, and simple design that diffuses light well. They find it lightweight and slim, with a good price. Many customers are satisfied with its profile and functionality. However, opinions differ on the wire length.
AI-generated from the text of customer reviews
13 reviews for LED Flush Mount Ceiling Light Fixture, 5000K Daylight White, 12inch 24W, 3200LM, Slim Flat Panel Lighting Fixture, Square Modern Ceiling Lamp for Bedroom, Kitchen, Living Room, Closet, Stairwell
Add a review
Related Products
Original price was: $33.99.$24.99Current price is: $24.99.
ItsMaryK8 –
Great light, easy install
I bought this to replace an old light in my guest room closet. It was easy to install and works great. Would definitely reconvene! Good quality and price.
Michele M –
Nice flat profile!
Easy to install and great light. We needed better lighting in our basement and garage. These were just what we needed.
Robert –
Beautiful and great product
We bought this to replace an old flouresence light for my daughter. At first we were not sure if it will work well there. But, when installed, she was so happy as it is much better looking and bright. A great product comes in with good price.
Wilton –
Good light, a bit challenging to install
This was replacing a previous unit. There was an 11×11 hole that the previous unit snapped into nicely. Since this unit is intended for surface mounting, I had to get a hanger to bridge two studs and an electrical box to place on the hanger. The boxes intended for ceiling fixtures have screws at a 45 degree angle. The mounting plate for this fixture has slots at 0 and 90 degrees. Fortunately, I was able to mount the box on the hanger at a 45 degree angle, but if I had been working with an existing ceiling box, it would have been a problem.My second problem was that the mounting plate assumes it will be surface mounted, but given that there was already a hole almost as big as the fixture, I had to mount it on the box. That mean’t it was probably 1/16th of an inch inside the sheetrock. That made for a tight fit, which I wanted, but it would not mate with the light fixture. I had to put a steel bar behind each side of it to pry them out. Once mated, I removed the bars and everything was fine.The third issue is the worst. The product came with a three wire pressure splice. It is a clever idea. You press down on a lever, insert the wire and release the lever. BUT . . . it was poorly made and didn’t hold the wires tightly enough. After three or four failed attempts, I threw it out and replaced it with a couple of Wago splices that use a similar concept, except with a stronger spring and a lever arm to lower it. They work very well and are highly recommended for situations like this where the two wires are of different thickness, and particularly when one is stranded, and the other is solid. Conventional wirenuts don’t always hold both wires well in such situations.
Wazu –
Amazing amount of light- can be modified to fit on ceiling fan.
These fixture are very bright. I am very happy with them. I’ve installed 5 of these in my home so far and I ordered three more. To make your install easier, I suggest a few things. 1) Connect two pieces of stranded 14 gauge wire about 8 inches long to the solid wires in your junction box – this will make your install a lot easier having flexible wires. 2) The fixture comes with European colored wires (blue/brown), stripped to expose about 1/4 inch of wire. Strip an additional 1/4 inch of the wire so you have about 1/2 inch of stripped wire – this will make it a lot easier to wire nut the wires together. 3) Install the plastic support ring to the junction box. 4) connect the flexible wires you installed to the fixture’s wires. Blue connects to White. Brown connects to Black. You can suspend the fixture by its wires if you are gentle. 5) Put the fixture on the support ring and turn 1/4 turn (counter-clockwise) (left), until it stops. Make sure you know which way to turn ahead of time.The ceiling fan above my desk needed more light…so I decided to install one of these fixtures. It can be done, but it is an advanced project. I removed the four A-15 sockets. I drilled a 1/8 hole directly in the center of the 12″ fixture, I was able to avoid any electronics and fed the pull chain thru the hole. I started with a 1/16″ drill bit and increased in size to a 1/8″ drill bit. Be careful, the drill can melt the plastic. Obviously drilling holes thru the fixture will void your warranty.I bought these fixtures from two different sellers for both the manufacturer is LedLightsWorld.com (on the box). If the specs are the same 24W, 3200 lumen, 5000K with different sellers on Amazon, it is the same product and go with the cheaper price. At present it is $24.88 per fixture.
Larry Hahn –
Nice bright light
Great for closet can be st to come on with movement
Hank Stamper –
Easy Installation
Bought this to replace an old (4) bulb 60’s vintage ceiling light fixture in the 10′ x 10′ kitchen. Packaging is very good so it survives shipping with no problems. The mounting ring attached to the existing electrical box in minutes. Attaching the 2 wires for power was a little awkward. The light comes with a pigtail about 6 inches long and without a helper to hold the fixture while attaching the wiring, it leaves you trying to hold the fixture and wiring it if alone. I took a small length of solid wire and made a little hook to hold the light while I wired it. After wiring, the fixture locks on the mounting ring with a quarter turn. The light fits flush to the ceiling and is only 1 inch thick. It is as bright as or even brighter than the (4) 60 watt bulbs I replaced and the light fills the room. I’m very happy with with this light and would buy again. It is a quality fixture. The box stores had a similar fixture at almost 3 times the price of this one and it was almost twice as thick. Only improvement I would recommend is to add a quick disconnect plug on the pigtail so you could just plug it in and spin it on when installing.
Lee Sauer –
Good Illumination, but Non-Standard Wiring and Difficult Instructions
Now that it’s installed and working, I’m happy with the result, but getting there wasn’t much fun.First, the instructions were clearly translated by someone not particularly fluent in English, and some of the steps and directions were challenging to understand and follow.Next, (and dangerous in my opinion), they used non-standard wire colors. At least here in the U.S., it is absolutely 100% standard for the neutral wire to be white or grey and the hot wire to be black. This light fixture used blue and brown respectively. This makes it all too easy to incorrectly connect this fixture to the connections in your home or office. This is a very bad idea.
John –
Like everything, but a one floor of light is surprise.
Bonnie Farquharson –
This light is CE, RoHS and CCC approved, always make certain your parts have been certified. Basic wiring with no ground or remote control. It is fantastic for a low clearance ceiling or just anywhere. Very simple to install. Crazy bright. We are very happy with it. Very happy on how fast it got to our remote area in BC. It replaced a recessed light from 1955. Huge improvement. We would recommend this light fixture.
Jeff H –
Easy to install and very slim, good warm white. But it is not as bright as it claimed to be 3200 lumens
Nima –
Easy to install, great look and light weight. Itâs light is bright and uniform. And the price is very reasonable.
Steevo21 –
Pour ma sale de bain excellent bonne éclairage