Comments on: LEONLITE COB LED Security Light, Motion Sensor Flood Lights Outdoor, Aluminum, 3 Modes Motion Detector+Dusk to Dawn+Switch Control, 100-277V, Adjustable 2-Head, IP65, 5000K Daylight, ETL, White

By: Philip Sollom

Philip Sollom — Fri, 10 Jan 2025 09:09:15 +0000

Spotlight is good quality. The big problem is fitting it to a wall. It needs a special junction box (presumably the one illustrated in the assembly instructions which is specifically designed for the fittings supplied with the spotlight). When ordering the spotlight the need for a junction box is not mentioned, nor is it shown in the details on the Amazon website, therefore the assumption is that it can be fitted in the same way as a normal UK spotlight. THIS IS NOT THE CASE.

By: MarÃa M.

MarÃa M. — Fri, 10 Jan 2025 09:09:15 +0000

muy fÃ¡cil de instalar, el instructivo muy entendible y alumbran muy bien

By: Rick Sturm

Rick Sturm — Fri, 10 Jan 2025 09:09:15 +0000

Well worth the money
This works really well and the LED lights light up a big area in my driveway and illuminate with white light not diffused. I would recommend buying this. I will buy more. The sensitivity on the infrared detector is completely settable to whatever you want it to be.

By: Robert J

Robert J — Fri, 10 Jan 2025 09:09:15 +0000

Works as described
Very good products with easy install

By: Bobbo

Bobbo — Fri, 10 Jan 2025 09:09:15 +0000

Design flaw
Let me explain the problem. The junction box on which the light must be mounted is on an outside wall, of course, since this is an exterior light. Interior junction boxes are typically placed inside a wall, which requires a hole to be cut in the interior wall. In the case of an outside wall, I imagine people try to avoid cutting holes, so the junction box is surface mounted. It is also quite shallow, probably because people typically don’t want these things to protrude a lot. But as a result there is essentially no room inside the junction box for the wires that power the light, and the wire nuts that connect the wires. With my previous light this was no problem, because the back of the light — where it attached to the junction box — was recessed, providing room for the wires and wire nuts. Not the Leonllte product. The back of the light is completely flat and flush. So it is impossible to attach the light without leaving a huge gap between the light and the junction box and wall. Stupid!

By: Chris

Chris — Fri, 10 Jan 2025 09:09:15 +0000

Flexible settings and reliable motion detection
I needed to replace a simple back door back yard light and saw a good review of this on some web site. Ordered, shipped, installed quickly. I like that I can set it to only stay on for less than a minute so I still have a dark sky environment. I was able to aim the motion sensor and direction of the lights all independent and get great results.

By: Edmund

Edmund — Fri, 10 Jan 2025 09:09:15 +0000

Liked the value and well made

By: Ron

Ron — Fri, 10 Jan 2025 09:09:15 +0000

Replaced existing incandescent fixtures on an urban lot. These are bright and work great. they are very sensitive. Im hoping they hold up to the weather.Very satisfied so far.

By: RC

RC — Fri, 10 Jan 2025 09:09:15 +0000

I use it inside my garage. motion detector is great, light is great very bright, It is as described recommend to buy

By: Waikiki

Waikiki — Fri, 10 Jan 2025 09:09:14 +0000

A good motion-activated bright LED light for less than $50
To be clear, Torchstar provided me with a Bronze 20W Dual-Head Motion Activated LED Outdoor Security Light at no cost for evaluation. If you’ve read my reviews, I call it as I see it…Windward Hawaii devours anything left outdoors with constant salty wind & rain. I have 6 motion-activated lights around the house. Poorly designed security lights reveal themselves quickly by triggering frequently for no apparent reason.Every motion-activated light will false-trigger. The good ones don’t do it very often, the worst ones do it constantly from cheaply made sensors. In 10 days, the Torchstar light false-triggered 6 times that I know of (I don’t stay-up all night to monitor it!). The false-triggers were caused by 4 torrential downpours & wind, and 2 unknowns. Unknowns are OK, if they don’t happen often. It could be cats since there was no wind — in which case it’s not a false triggering. Torrential rains & wind can trigger any light I’ve ever installed. So far, this light offers above average sensor performance.To test sensitivity, I tried moving toward it from off to the side — from out in the yard. Motion sensors are most sensitive at angles, and less sensitive from straight-on. After moving the sensor around to find the best position, (every situation is different), I walked towards it slowly. It came on at about 30 ft. at 45 & 60 degree angles. From straight-on, it activated at about 20 ft. I never came close to the advertised 70 ft. sensitivity, which is typical. I’m sure under ideal conditions, the distance would improve, but in the real world, cut any advertised figure in half. I have one expensive motion light in the front yard facing the street. It’s sensor covers 270 degrees, and reaches 50+ ft., but it’s made for commercial properties, and cost $150! Heavy rain & wind triggers it too.So far, the Torchstar light seems to be a good motion-activated, very bright LED light. It does everything expected of it — well. The brightness of the lights is very impressive. Long periods of time in this environment will ultimately reveal if this light can withstand a tropical beating. So far, so good. I will update the review if anything changes… BTW, Costco sells a similar (but different) LED security light. They last about a year. I’ve had 5 fail — avoid it.Pros* Blindingly bright, don’t look at it! It lights-up my 1/3 acre open-space backyard well* Compact, this is not a big light. It’s light-weight too, aiding installation* Rotating shades on each light are a nice touch* Easy light adjustment (which is not the case on some lights)* Very efficient* Cool to the touchCons* I noticed the white version has a 180 degree (half circle) sensor, the bronze 150. They’re about the same price. The white model also moves the sensor farther out-front of the light, improving coverage. If you install a security light on the corner of your house, or along a wall, 180+ degree sensors are a must. Since I mounted the bronze version on a wall, it was possible to sneak-up very close to the light, but at 6 ft. it got me. 150 degree sensors have a more limited use. If the area you need covered is limited by trees, or is an alleyway or walkway, then 150 degree sensors are preferable. If mounted to cover wider areas, 150 degree lights can be thwarted by walking on the extreme sides.* Neutral colors better coordinate with a wider range of house color & surroundings. Bronze doesn’t match much except a redwood tree or a log cabin! White or gray would be better, I might spray-paint mine …