Comments on: Motion Sensor Lights Indoor Plug-in LED Step Lights Strip with UL FCC Adapter Timer Dimmer Multi-Functional Controller for Stairway Kitchen Cabinet Bedroom Corridor Washroom Counter Shelf Showcase

By: Mariano flores Santiago

Mariano flores Santiago — Thu, 06 Mar 2025 02:40:29 +0000

Producto de se desprograma.

By: Chateaufornow

Chateaufornow — Thu, 06 Mar 2025 02:40:29 +0000

My aged dog has problems seeing and this strip is used on the interior of the bullnose to help her see the steps.

By: Hermes

Hermes — Thu, 06 Mar 2025 02:40:29 +0000

This lighting product is excellent. We set it up so that it comes on when we go down the stairs since it was hard for us to make out the edge of each step in the dark. We tried several different placements of the strip (with scotch tape) before settling on attaching it to the bottom of the railing with the sticky tape it comes with. We’re very pleased with the functionality.

By: SaliÃ³ muy buena

SaliÃ³ muy buena — Thu, 06 Mar 2025 02:40:29 +0000

Excelente producto

By: Noel H.

Noel H. — Thu, 06 Mar 2025 02:40:28 +0000

Motion light strip
Used them as an under bed light, running it on the backside of the under frame. Works great for background night light.

By: Reilly partridge

Reilly partridge — Thu, 06 Mar 2025 02:40:28 +0000

Worked great for a year then went out
The leds worked great and bright for my safe. But the controller eventually quit.

By: Patricia Malbrough

Patricia Malbrough — Thu, 06 Mar 2025 02:40:28 +0000

This performs as described
Likes: Provides under-cabinet lighting for a price within my budget. The product performs as described. I’ve upgraded my kitchen. The auto-on feature is so convenient and the option to always leave the lights on is nice.Dislikes: The wires have to be hidden since I don’t have in-the-wall wiring. This necessitated taping the wire from the power plug to the control box to the underside of the cabinets, and the wire from the end of the light strip to the control box is visible and can’t be hidden. I wish now that I had ordered a diffuser channel since my cabinets do not have a front lip and I had to attach them to the back underside of the cabinet, which creates a shadow against the back well of my countertop. When you are sitting down you can see the light strip under the cabinet against the back wall.All in all, this is a very good product for the price and accomplishes what I need for my out-of-date kitchen.

By: FATIMA ORTEGA

FATIMA ORTEGA — Thu, 06 Mar 2025 02:40:28 +0000

ResultÃ³ muy sencilla la instalaciÃ³n, y hacen lucir mucho los espacios yo las puse detrÃ¡s de un espejo y en la cocina, me parece un excelente producto

By: Becky

Becky — Thu, 06 Mar 2025 02:40:27 +0000

Has all the features I was looking for, and some features I didn’t know I wanted
I was looking for a battery operated motion sensing LED strip that’s also dimmable, so I could light up the underside of an L-shaped stair that’s part of a two step transition between two rooms that guests tend to miss because of our dark floors. That combination is quite impossible to find. However, I came across this product has all the features except it’s not battery operated. The cord is long enough that I was able to reach it to a plug and still position the motion sensor where I wanted it, and it comes with stick-on clips to hold the cord against the wall. The power input plugs in at the top of the unit, and the LED strip plugs into the bottom. There’s about 8″ of cord before the actual strip itself begins.The LED strip had double sided tape so you can stick it directly to things. In my case it needed to be stuck upside down on the bottom edge of a stair. At one point I had to pull off a bit of it to readjust and it didn’t appear to be overly stuck on, but after a while it’ll probably get more “stuck” and might take off some of your paint or finish if/when you do need to peel it off. I thought about using 3M no-damage strips instead, but they were too wide for the bottom of the stair (would have poked out) and it didn’t seem worth it to cut them in half lengthwise and position them every few inches to prevent sagging just on the off chance that someday I might want to remove the strip.The LED light strip can be cut, but be sure to cut it in places where two copper strips are exposed – otherwise if you cut it elsewhere the 2-3 lights in between exposed copper strips don’t function. They supply a few connectors and right angle pieces so you can cut it at the exposed copper pieces, slide the ends underneath the little holders in the connectors, and connect the right angle piece. Unfortunately for me I didn’t think to align the strip where I might need a right angle, and the exposed copper strips were’t quite in the right place to do that. However, they do say you can bend the strip gently, and they include a drawing, so I was able to do that instead of using the right-angle piece.It also comes with double sided tape to stick the unit onto something (a wall, or in my case baseboard).The instructions are well written, considering it was likely translated from another language, and do hold on to the instructions because it’s hard to remember what all the different light combinations mean when you click any of the setting buttons.Here’s the full set of features:- It can be set to a simple on/off via a button, or auto-on via motion sensing.- You can pick from 6 options about how long you want the lights to stay on after sensing motion: 10 seconds, 30 seconds, 60 seconds, 180 seconds, 300 seconds, and 600 seconds.- For motion sensing, there’s an energy saving option to toggle between turning on the lights day or night, vs only turning on the lights when it’s generally dark enough that you’d need them.- For dimming, you can choose from 6 different “levels” ranging from 100%, 80%, 60%, 40%, 25%, and 10%. I use the 10% setting and my only complaint is that it could still be a bit dimmer. If there was a 5% option I’d use that.

By: Scott P.

Scott P. — Thu, 06 Mar 2025 02:40:27 +0000

Great setup for underbed lighting.
I installed these under my bed and I love the way they look. The length is just right for a queen size bed. The price is good for what you get. The motion sensor works fantastic. They plug in so youâre good to go. Come with adhesive on the controller and the lights. And if you wanna get creative like I did you can add some 12v dc cob lights to the controller and have a better cleaner light.