ORX Plus Tools 2PCS Deburring Chamfer Tool Set, Deburring External Drill Bit, Countersink Drill Bit for Fit 1/8″-3/4″(3mm-19mm)
$44.99
Price: $44.99
(as of Feb 20, 2025 12:05:58 UTC – Details)
Product Description
Products of ORX PLUS TOOLS are original design with multinational patents. Also, product quality is always our top priority.
ORX PLUS TOOLS DEBURRING CHAMFER TOOL BITS 3-19MM
Easy to work- Attaching the deburring external chamfer tool to the end of your power drill, Use the lowest speed on the drill bit, and then slightly applying pressure to remove the burr.Cost-Effective- These deburring external chamfer tool can be used for repairing damaged bolt and tightening the nuts in place. You do not need to spend time and money to find hard-to-find or expensive replacement bolts.Safety Design- Quickly repairs damaged bolts and tightens the nuts in place without hurting your hand, no sparks, and no burns; Simplifies the repair process.Using proper speeds and feeds-Drill use 0-400 RPMs. Fit 1/8′ (3mm) to 3/4′ (19mm)Widely Application-Effectively used in Stainless Steel, Hardened Steel, Mild Steel, Copper, Brass, Aluminum, Fiberglass, Wood, Plastic
HOW TO USE&STEPS
1. DRILL MODEL
Don’t use impact/hammer driver. Please use drill driver to deburring/chamfering.
2.FIXED WORKPIECE
To make sure perfect deburring, please fix the workpiece tight.
3.SPRAY OIL
Hard steel could use lubricating oil to improve tool performance
4.DEBURRING/CHAMFERING
In a clockwise direction only. Slightly applying pressure to remove the burr.
3MM-19MM
Quick chuck3 HSS bladesRPM: 0-400
15MM-36MM
Hex Shank5 Tungsten bladesRPM: 0-150
34MM-54MM
Hex Shank9 Tungsten bladesRPM: 0-150
Product Dimensions : 1.14 x 1.14 x 1.77 inches; 1.6 ounces
Item model number : PO-045C
Date First Available : November 11, 2020
Manufacturer : ORX PLUS TOOLS
ASIN : B08N6ZY9NM
Drill use 0-400 RPMs Fit 1/8′ (3mm) to 3/4′ (19mm)
Take the rough edge off of fresh-cut pipes, bolts, etc with ease. Helps make it easier for nuts and fittings to go on and produce an overall nicer finished product
Outer works on -Round Stock -Bar Stock -Threaded Rod -Screws and more
Inner Chamfer Tool Works On -Steel Pipe -Iron Pipe -Stainless Steel Pipe -Copper Tube -Aluminum Tube -Hard Plastic Tube
Effective on -Stainless -Hardened Steel -Mild Steel -Copper -Brass -Wood -Fiberglass -Hard Plastic
Customers say
Customers find the deburring tool useful and a good value for the money. It works well on various threads and conduits, as intended. Many customers appreciate its ease of use and speed. However, opinions differ regarding durability, tool quality, blade quality, and thread quality.
AI-generated from the text of customer reviews
13 reviews for ORX Plus Tools 2PCS Deburring Chamfer Tool Set, Deburring External Drill Bit, Countersink Drill Bit for Fit 1/8″-3/4″(3mm-19mm)
Add a review
Related Products
$44.99
spudly –
Worked great on hardened studs
I had to cut down the studs on my rear axle as the ARP ones were too long to use with closed lugs nuts. The was able to go through all ten studs and chamfer down the sawed off end on all ten studs. I used a regular cordless drill set to the lower speed setting (1 instead of 2 for my older Dewalt) and the tool worked its magic on the ends.I’m not sure how many more studs it would have in it, but I know that it went through ten hardened studs with great results and still has material left in it for more work down the road. It’s in my drill bit drawer now for use on the next round of all-thread, studs, or bolts I need to chop down and chamfer.The pictures show the first stud and the last stud I used this on as well as what the starting point was for each stud.
Jordan –
Actual cutting tools, not garbage!!
The de-burring cup is an actual 3 point cutting tool that utilizes HSS to shave the end of bolts, bar stock, etc… so, if you come at it cranked up to 11 and expect good results youâre going to do some damage, or have a bad day. Anyone whoâs drilled metal, or used a single point cutting device (lathe, fly cutter) knows that speed and feed is the name of the game. Start on a slower speed, and apply generous pressure, and after a few times youâll get the feel for it and be able to yield phenomenal results. Iâve used it on mild steel, and stainless, and have had excellent results. I donât like that you canât replace the HSS inserts, but I realize for that option youâd end up having to completely redesign the device. Also, the little indented areas where the chips are supposed to collect does get somewhat clogged, but I think this feature is more like a chip breaker, not an area for shavings to reside long term. I ended up using a metal pick I have to clear them, and it worked great. So, moral of the story, if youâre a wood working screw jockey who expects tools to yield to your will youâre going to have difficulty with this cup. But, if you come at it from a machinist perspective, youâll wonder why you wasted money on the $10 cheapo infomercial style debuting cups.The chamfer I LOVE!! Iâve had issues with the Irwin/harbor freight chamfering tools. This is the solution to your desire to create a chamfer, but again, name of the game is low and slow until you find a good speed and pressure to apply. Be thoughtful, and youâll love it. Buy once, cry once boys… I know, terrible phrase, but itâs true.
Brian De Contreras –
It works well if you know the secret ð
Works well once you figure out the secret. When I first got this bit I was pretty upset It would chatter like a jackhammer and leave a horrible wavy jagged surface finish on the parts. It took a bit of trial and error to finally figure out that if I set my drill to the slow mode and basically use my whole body weight into the drill I would get very reliably smooth cuts. At that point I was pretty impressed, the surface finish is near mirror like most of the time. The only issue I have found is the small channels that are supposed to curl the chips and eject them sometimes will hold on to the aluminum. this may not be an issue with steel but with aluminum it definitely means a lot of manually clearing those chips with your finger or some sort of pick. I bought this bit specifically to chamfer 5/8 in 6061 aluminum for one of the parts we make, at this point we have done a few hundred of these pins and the bit works like a champ. Quite honestly with a hand drill and our custom soft jaws clamping the pin, chamfering, flipping, and chamfering the other side is so dang quick I’m not quite sure you could chamfer these parts in a manual lathe or mill anywhere as fast as this process. All in all I would recommend this product. But if it doesn’t work like intended play around with your drill pressure and speed.
jim chemsak –
Gives a good taper when used properly.
Great tool for tapering the ends of all thread rod, bolts, solid rod, steel & copper pipe (aluminum pipe is tricky). As others have said, DO NOT USE AN IMPACT DRILL!!! A small hand held battery drill is best, start at low speed and press lightly until desired taper is achieved. Hit it straight on, do not walk it around in a circle. If there is a burr on the work piece, say a cut off tip, grind or file it off first. This will keep the tool from giving you an off-center taper. Iâve used mine a dozen times w/o problem, still sharp.
RCOR –
Worth buying and works awesome
After reviewing many others, I decided to buy this ORX Plus Tools Deburring Drill Bit for bolt sizes 1/8″-3/4″.It has saved me a lot of time on projects, maintenance and repairs. I mainly use it on threaded bolts. It’s easy to use. It a quick attachment. The price is a little high but worth it. It’s been nine months and it still works like new. I use a little bit of oil every now and then, just like with my regular drill bits. I have used it over forty times and always gets the job done nicely.
Get some –
Works great
What a surprise to use a cheap tool that actually works. Cuts like a hot knife through butter. Nuts thread on perfectly. Used on m6 and m10 bolts.
Connor Dion –
Great tool for unorthodox fixes
I never write reviews, but I felt that this thing deserves one considering how much money it saved me. If youâre here then you probably are hard up; having been through the wringer trying to find something locally that will fix your problem with a bolt that canât be replaced/changed. If so, then this is the tool you need. It âre-threadedâ the end of a frame mounted stud on my truck in less than 10 seconds and saved me a ton of cash in the end. Itâs high quality, strong and surprisingly durable. Get it!
Nicolai Reidovitch –
Broke in less than a week of use
It worked very well for about 30 or so uses. The chuck snapped and now it is useless. If you do purchase this I’d advise against putting it in your impact. Use a drill instead. Not impressed with the quality *update * seller contacted me and replaced item for free. I appreciate this level of customer service
Mario –
No duró ni 2 usadas. Se despega la cabeza del perno que se mete en el taladro.
Ryan carpenter –
Really happy with this. Many years as a builder struggling to get a treaded rod clean after cutting to length this eliminates all the stress and saves you time. Not 100% how long it will last but already saved me many ours work so itâs paid for itself. 10/10
Abdulla S. –
Works well thanks
Phil –
Thanks!
Robert Hagen –
Just used it to debur 4 long bolts I had to cut down on my trailer. It worked flawlessly.