Comments on: Panasonic 30” Microwave Trim Kit for Panasonic 1.6 cu ft Microwave Ovens – NN-TK732SS (Stainless Steel)

By: BMBM

BMBM — Thu, 06 Feb 2025 07:13:17 +0000

Not happy with mounting method. Way too specific placement / dependent on openi g cut out dimensions. Works ok I guess for new build cabinetry but no good for my existing openimg cut out.Had to get 4 new cleat/tab brackets fabricated to mount it.This trim with vents is for micro. cabinet without back or top venting.Has approx. 1/2 ” thickness (projection from front face of cabinet).

By: Kingston ontario customer

Kingston ontario customer — Thu, 06 Feb 2025 07:13:16 +0000

It is a very good oven trim kit. It looks great, it made stainless steel. very happy

By: Liz

Liz — Thu, 06 Feb 2025 07:13:16 +0000

So far it looks very nice, not installed yet, but will be a lovely addition to my new kitchen

By: I.W.

I.W. — Thu, 06 Feb 2025 07:13:16 +0000

It looks great!

By: Amazon Customer

Amazon Customer — Thu, 06 Feb 2025 07:13:15 +0000

Not for microwave model Panasonic NN-SN766S
The trim kit is larger than Panasonic microwave model NN-SN766S that it is supposed to be compatible with. This means that there is a space between the microwave and the trim leaving a visual hole. I did not expect this since ordering a Panasonic microwave and the corresponding trim kit. I had already folded and applied the left duct, returning the trim kit was not an option.

By: Cha0tic

Cha0tic — Thu, 06 Feb 2025 07:13:15 +0000

Installed perfectly
We are very pleased with how easy this was to install and how great it looks in the kitchen.

By: Han Solo

Han Solo — Thu, 06 Feb 2025 07:13:15 +0000

NOT so easy to install UNLESS your cabinet hole is exactly the right size.
The trim actually does fit around the microwave properly. You are supposed to leave space so that the door opens properly. From a distance, the extra space looks black and professional and is probably about 1/2″ around the width ends and perhaps a little less on the top and bottom. The material for the shunt to bring the exhaust forward through the vents is rudimentary and requires the use of tape, which is pretty lame. Even so it still works.My main concern is NOT one raised by others. This is that the design requires that the cabinet hole have a width that is about 24″ and ideally a height that is probably closer to 14″. In other words, the points of connection are FIXED for precise dimensions on the back of the trim. Whatever the exact dimension is, enough) you CANNOT align all four connecting points UNLESS your hole is the perfect height and at least beyond a certain width. This means you either need someone to cut your hole (if it’s too small) or else the unit is only connected at 2 points to the cabinet.The other concerns are that it would have been better if there were a way to put a screw through the trim without marring the mirror-like finish, but there isn’t. Other trim designs allow for holes to screw into the cabinetry. The actual trim itself is beautiful, but it is cheap and very flimsy like a soft aluminum. If you don’t look closely it will be fine. I also found it was actually a little shorter than my hole and so I had to position it just right so you didn’t notice the gaps (would have been nice to have more material to work with. There’s also no easy adjustment on the height of the microwave so I found I had to buy a piece of wood to go under the existing stand to align it properly.So how else can you attach it if you can’t align the hardware? There are 2 possibilities that I thought of. First, you can get a screw that you put into your cabinet to match up with the holes at four points into the frame. This requires very precise placement and is NOT easy to do. Second, you can actually fill the side lengths with wood cut to fit there and glue those pieces to your cabinet frame. This is what I ended up doing.

By: artie

artie — Thu, 06 Feb 2025 07:13:15 +0000

Trim kit fit perfectly, installation was straight forward but follow instructions. Most important, looks great..

By: F-111A

F-111A — Thu, 06 Feb 2025 07:13:14 +0000

It fits perfectly!
My old microwave died, so I bought a new Panasonic 1.6 cf one to replace the old one. The problem was the old one fit inside a custom cabinet, that was designed for it; apparently this was a valid size 30+ years ago, but is no longer the standard size. I bought the new one to fit in the cabinet, not realizing the old trim surround would no longer work. I then measured (and measured again) to make sure that the new Panasonic surround would fit…which it did (thank you, Amazon, for including the measurements for the product). The new Panasonic surround seems a bit pricey, but when it looks, and fits, as good as it does, the price issue goes away. The Panasonic surround is designed for the Panasonic microwave, and definitely enhances the look of the installation. I’m glad that this surround was available for me.

By: Dorca Torres

Dorca Torres — Thu, 06 Feb 2025 07:13:14 +0000

Perfect!!
It fits perfectly for my microwave, Great