SKYSEN 6FT Sliding barn Door Hardware kit, Barn Door Track, 1/4” Thick Material- Combination Track- Smooth and Quiet- Easy to Install- Black (J Shape-5)
$29.99
Price: $29.99
(as of Jan 11, 2025 23:36:22 UTC – Details)
From the brand
skysen since 2007
Professonal on barn door hardware kit, fence gate hardware, garage door decorative hardware, organizer
skysen barn door hardware kit
skysen fence gate hardware
skysen home improvement
How did we get our start?
We start from the barn door hardware kit, but after that we find the spare parts related to barn door hardware also have a big requirement in market, that is why we have sell various product now.
Why do we love what we do?
We love our work since it can help the people all over world. they can use the skysen product to improve their home.
What makes our products unique?
All skysen product have passed testing before load on store. Every step of production have the inspector control the quality for our goods.
[SUPER QUALITY RAW MATERIAL] Barn door hardware kit are made of 1/4” thick carbon steel (Maximum load 265lbs). Barn door wheel are made of POM (Stronger than plastic or nylon). Barn door spacer is also made of carbon steel (More stable than other plastic spacer). The bolts and leg screws are 8.8 grade (Keep the barn door hardware system last for long). The surface is spray black powder coat (Anti-rust, Looks smooth).
[EASY TO INSTALL] Barn door track pre-drilled hole space is 16″, Step by Step Instruction included. Our Instruction is listing every step for installation from A to Z. You can finish the installation of barn door hardware kit in half an hour if you get 2 workers. In case you get any problem or missing parts during installation, please free feel to contact us via amazon.
[IF MY BARN DOOR FIT THIS SIZE] 6FT Barn door hardware kit fit for door panel width up to 36”, Fit for door thickness from 1-3/8″ to 1-3/4″(If you your barn door panel is too thin, then you can using the 5mm black spacer pad inside package, if your barn door is too thick, then you need to buy longer bolt extra). If you have a door way trim, then you need to buy an extra trim board to install the barn door track or just remove your trim.
[WHY US] Get super quality barn door hardware kit from us, All the barn door track and barn door roller have been inspected in factory before delivery, Also they have been Passed 100,000 times opening and closing test to ensure the barn door hardware kit you get will works fine. Get a barn door hardware kit with a manufacturer price, why not?
[WHAT YOU WILL GET] (5)Barn door track, (5) Wall spacer with leg screws, (2) Door stopper, (2) Barn door roller with bolts and nuts, (2) End Cap, (1) Floor Guide, (1) Step by Step Manual. “ONLY HARDWARE KIT INCLUDING, BARN DOORS WERE NOT INCLUDED.”
Customers say
Customers find the door hardware easy to install with accurate assembly instructions and a simple door guide. They appreciate its sturdy build quality that can support heavy interior doors. Many find it looks good and offers good value for money. The roller assembly and door fit are also appreciated. However, opinions differ on the rail size.
AI-generated from the text of customer reviews
8 reviews for SKYSEN 6FT Sliding barn Door Hardware kit, Barn Door Track, 1/4” Thick Material- Combination Track- Smooth and Quiet- Easy to Install- Black (J Shape-5)
Add a review
Related Products
$29.99
X-FACTOR Automotive –
What a nice kit!
I didn’t know what to expect for such a reasonable price, but was pleasantly surprised. It came with all hardware and all the pieces are actually metal, not cheap plastic. I also had concerns about the 5 piece rail, but my concerns were unfounded. It assembled easily and with the countersunk screws and support plates, it’s very rigid. No complaints here! Everything in nicely painted and looks great. The hanger and roller assembly it nice and heavy and rolls nice. The stops for fully open or closed even have rubber bumpers for quiet operation.
Cindy T Cupp –
The door we used is heavy and the hardware was perfect for it
Loved the hardware and it’s perfect for my old door. Used in our tiny house bathroom, thanks so much!
Keisha –
Easy to assemble
This product was easy to assemble and perfect for what I was looking for. I only gave it 4 stars only because the parts where you can join it together was hard to put them together. Some of the paint was chipped off due to the snug fit (see in picture) but I donât see a need to return because it doesnât effect the use of it.
Daryl A. Kling –
Can be cut to fit smaller than 6ft areas. Solid Hardware Kit
I installed this kit into a space about 5 1/2 feet wide To do this, I held the bar up against the wall, taking care to line the mounting holes up with the clearly marked studs (using painters tape). Once lined up w the studs, I marked and cut the ends off on each side. From here, I drilled two new mounting holes through the bar for the end studs which should be present on any wall. This is a very soft steel so drilling was very easy. I had to trim the flange off one side of the mounting stand-offs to allow it to fit flush against the corner wall. This allowed the included wood-threaded bolts to go through the [near] center of the wall stud.Installation tips: This kit comes with very smooth rolling hardware so you have to be sure to get your top bar as absolutely level as possible. This also ensuring that the bar is straight through each joint. There are five sections so all four joints have to be very straight. If you have a slight “up” angle at either end, as I did, the door won’t stay pushed all the way to that side. To fix mine, I was able to lightly knock the end down at the last (leftmost) mounting standoff.Spacers are included which are meant to go between the rail stand-offs and the wall. I initially did not use them and the roller bolts rubbed on the wall ever so slightly. I installed one set of spacers which resulted in perfect spacing.The floor guides can be the trickiest part if you’re drilling through vynil or laminate flooring to get down to some concrete. I drilled through the vinyl using a standard multi-purpose bit, then switched to a masonry bit to get down into the slab for the insert. I only installed a single floor guide on the outside for now and am using peel-n-stick felt dots on the back of the door to ride on the baseboard. So far this is good but I have some clear protective vinyl adhesive on order which we will install on the baseboard to make it slide easier/smoother as well as provide protective layer on top of the baseboard paint.All in all, this is a very solid kit that installs well.
A.Withers –
Get it!
Barn door hardware is so expensive sometimes. I found these on sale for $30 and purchased immediately! We were looking for a budget friendly option for our odd-layout kitchen (fridge and laundry are in a closet). We reused the trifold closet door and added trim and painted back. Installation was easy and the stop pieces were great to prevent from hitting wall and appliances. GET THEM!
Diana –
Great!!
Easy to install, very good hardware great value, fast shipping
Geneva Ulch –
Works and looks good butâ¦â¦
Because of the 5 sections that have to be fastened together I noticed that the 2 little counter sink screws between each section did not keep the assembled track solid while trying to find level across the length. It will flex and bow a bit so I had to use a small level and level each section as I installed the track. I also noticed one wheel bumps at one of the places where two sections join. But hey, the price was right. That being said, next time I will spend a little more and get a one piece track.
Robert –
Excelente
Excelente producto recomendado