Spurtar Rubber Stair Treads 30″ x 10″ 6PCS, Non-Slip Outdoor Rubber Stair Treads for Wooden Steps with Nosing for Concrete Marble Tile Metal Steps, Black
Original price was: $64.97.$54.99Current price is: $54.99.
Price: $64.97 - $54.99
(as of Jan 27, 2025 19:19:38 UTC – Details)
Product Description
For Outdoor Use
With high temperature and oxidation resistance, these stair treads are perfect to be used for outdoor stairs.
Anti-skid Checkers Grid Design
This checkers grid design rubber stair treads are full of diamond protuberance on the surface, increasing friction force, and preventing slippery.
Easy to Install & Remove
The special glue used for these stair treads nonslip can easily be removed without leaving any residue behind.
Easy to Clean Up
This outdoor stair tread is convenient to be cleaned. You just need a soft cloth and soapy water for daily cleaning.
Packing List
6 x Rubber Stair Treads Double-sided Tapes User Manual
Spurtar Black Rubber Stair Treads for Wooden Steps, 30″ x 10″ – 6PCS
Outstanding Features
✔️ Universal Size: 30″x10″ large size increases safety by covering a larger stair surface. You can also cut to fit the exact dimensions you need. ✔️Slip-resistant Design: Full of diamond protuberance with beautiful design, increasing friction force and preventing slippery. ✔️Sturdy Adhesive: The adhesive is easy to attach by tearing off, firm, and with no residue. ✔️Sunscreen & Waterproof: The stair treads are sunscreen and waterproof. With high temperature and oxidation resistance, it can last longer. ✔️Easy to Install: It is convenient to be installed and the special glue used can easily be removed without leaving any residue behind.
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.6 out of 5 stars
464
4.4 out of 5 stars
483
4.6 out of 5 stars
464
4.6 out of 5 stars
464
4.6 out of 5 stars
464
4.6 out of 5 stars
464
Price
$42.99$42.99 $30.99$30.99 $54.99$54.99 $64.99$64.99 $51.99$51.99 $39.99$39.99
Surface Design
Diamond Protrusions Diamond Protrusions Red Bright Strip & Triangular Protrusions Diamond Protrusions Diamond Protrusions Diamond Protrusions
Size
30″ x 10″ 30″ x 10″ 35″ x 10″ 35″ x 10″ 35″ x 10″ 35″ x 10″
QTY
5 Pack 3 Pack 5 Pack 6 Pack 5 Pack 3 Pack
Material
Rubber Rubber Rubber Rubber Rubber Rubber
Application
Outdoor & Indoor Stair Steps Outdoor & Indoor Stair Steps Outdoor & Indoor Stair Steps Outdoor & Indoor Stair Steps Outdoor & Indoor Stair Steps Outdoor & Indoor Stair Steps
Brand
Spurtar Spurtar Spurtar Spurtar Spurtar Spurtar
Product Dimensions : 30 x 10 x 0.1 inches; 12.6 Pounds
Item model number : HFM000206
Date First Available : May 14, 2022
Manufacturer : Spurtar
ASIN : B0B19Y13N1
Country of Origin : China
✔️ Suitable Universal Size: Spurtar stair treads non slip come with a size of 30″x10″ with 0.1” of thickness. Large size increases safety by covering a larger stair surface with no-slip rubber stair treads for stair steps, you can also cut the rubber mat to fit the exact dimensions you need
✔️ Slip-resistant Design: These outdoor stair treads are full of diamond protuberance with a beautiful design on the anti-slip mat surface, increasing friction force and preventing slipping, you can also use the attached tape to improve stability. It will keep your family safe when going upstairs or downstairs. The protuberance also makes the black outdoor rubber mat stair treads look more beautiful
✔️ Sturdy Adhesive: There are high-quality adhesives coming with each stair tread non slip mat. The adhesive is easy to attach by tearing off, firm, and with no residue. The rubber stair rug mat can be fitted firmly with all kinds of mobile home steps such as grips tile, wood, concrete steps, etc.
✔️ Sunscreen & Waterproof: Made of high-quality natural rubber, without excitant odor. Our stair nosing non slip pad is sunscreen and waterproof. You can also use it for indoor and outdoor stairs. With high temperature and oxidation resistance, this stair trim stair tread can last longer
✔️ Easy to Install & Remove: This rubber stair tread is convenient to install and you only need to clean your stair steps and stick the staircase treads with the adhesive stickers. The special glue used for these stair treads nonslip can easily be removed without leaving any residue behind
Customers say
Customers find the rug provides good traction and safety for stairs. They find it sturdy and well-made, with non-slip diamonds on the steps. Installation is easy and the rug looks nice. However, some customers have different views on the adhesive quality.
AI-generated from the text of customer reviews
13 reviews for Spurtar Rubber Stair Treads 30″ x 10″ 6PCS, Non-Slip Outdoor Rubber Stair Treads for Wooden Steps with Nosing for Concrete Marble Tile Metal Steps, Black
Add a review
Related Products
Original price was: $64.97.$54.99Current price is: $54.99.
Windows Customer –
saves the stairs
I wanted to get something to protect the stairs going from garage into house. I was always cleaning and repainting the stairs as they constantly got dirty and scuffed. These work so well. I didn’t permanently attach them as they are heavy enough and have the lip on the front that they stay in place. I’ve had them over 3 years.
Glen Miller –
Nice stair treads
Nice fairly thick stair treads. I installed them on wood deck stairs that were slippery in the winter. Makes the stairs safer and less slippery. Great value for the money. Easy to clean.
Debra S. –
I bought these for my 15 year old dog
My dog has bad arthritis and was getting very reluctant to use the stairs on my front porch because she would often slip. 2 stairs are wood, 2 are rock steps. I was afraid of her falling. These stair treads make it much easier for her to feel secure and have stopped her from slipping. I put one tread on each of the wooden steps, and one on the rock step. She immediately learned to use them and is much more confident going up and down the steps without slipping. I didn’t use the adhesive because we’ve had so much rain the wood steps are still wet. I just laid them in place and they have stayed without shifting so far. I will probably nail them into the wood once it dries out. But for now they are staying put on the wood and the rock without any adhesive, so I can’t comment on the quality of the adhesive yet. The treads seem quite sturdy. I’m happy with this purchase and would purchase more in the future if they hold up well in the weather.
GAM –
Look Great, Easy to Cut, Easy to Install
I’ve been meaning to update the stairway to our 140 year-old attic after someone else did so in the 1960’s. These stair treads are an attractive and safe addition to utility staircase. They are easy to cut and the rubber is very gripping. I used 6′ of a heavier double-sided carpet tape for each tread in my application since the smaller rolls supplied don’t provide enough adhesive space for my tastes. Good product!
Bill B –
High quality rubber stair treads- they do require some thought for installation
I ordered two sets of 5 treads and one 3 pack for my attic. I did trim the front edge of the treads so that they did not hang over the edge of the stairs- a trip hazzard in my opinion. I used a T sqaure and a very sharp box cutter to remove the extra materials. Once I got the hang of it it was pretty easy.Where I had issues was the attachment methods. Here is what I did.1). Clean the wood steps and sand hogh spots2). Measure the lenght of the actual stair minus the length of the rubber treads and divide the answer by 2 so that you center the rubber tread.3). Place the rubber tread on the stair and mark all four corners/edges with a pencil4). Cut the supplied 3M adhesive strips to fit the front of the wood stairs and I also placed one half of a 3m strip in the right and left rear corners going along the long dimension of the stairs. This helps to hold the tread down.5). Take a 3m strip and cut it on the long length into four even-width pieces. These should be about .5″ wide. Apply these to the front edge of the stairs.6) Apply a good construction adhesive to the top of the stairs in an X pattern starting from the front corner diagonally across to the right top corner. Repeat for the right front to top left. Fill in the opne areas with a .25″ wide bead of adhesive.7). Reniove the top layer of each of the 3M adhesives and discard them8) Place the rubber tread at your marks on the stairs and smooth the front edge onto the glue strips.9). Push pn the top of the tread in all corness and across the tread from front to rear and frm left to right to spread the adhesive.10) I used brown 17g x 1″ panel nails to help secure the tread. I nailed 5 places on each front piece and then one in each corner on the horizontal surface plus 1 on the back edge in the middle. A total of 10 nails for my applicationSounds like a lot of work but the instruction leaves a lot to be desired so this was my plan and it worked.See the picture for the final product. Took me three hours to do 15 treads including prep, design, trimming and installation.
Wendy R. –
Not enough mounting tape and edges donât lay flat
They came rolled up; not flat, and also were coming out of the box. (Need to use a stronger box). Not enough mounting tape to do a good job. Just went to Loweâs and bought one more roll â¦for $10. Hope itâs enough! Wish they were stiffer so the flap that hangs over the edge would stay at a 45°angle against the step and not curve outward and be wavy along the edge – looks like a tripping hazard if the front of a shoe comes up and catches on them. Great idea just needs some improvement in material and more mounting tape. Shouldnât have to go buy more for the price.
Fish Fry –
Well made
I bought these for two outdoor porch steps. The choice was a gutter above the steps (costly and labor) or these to protect the steps and keep them from being slippery. Perfect! Got three, laid down two and cut the third one in half to cover the steps. the thickness is perfect. I didn’t eve have to tack or velcro, they laid nicely on the steps with no fear of slippage or tripping. nice to see rubber products again!
Alyeli8 –
Love these treads!
Quality is great, they will be easy to keep clean. We used them on our garage steps. I didnât use the adhesive strips provided. Instead I used contact cement to adhere them. I put them where I wanted, with a pencil drew the outline of the tread on the step. Then painted on the contact cement on the back side of the tread and the inside of the line drawn on the step. And then carefully placed it on the step. They look amazing and seem like they will hold up great! (2 of the treads came in a little bent, but with the adhesive cement it smoothed right out). This 3 pack being less than $30 is a steal in my opinion!
Criss H. –
I recently installed the Spurtar Rubber Stair Treads on the wooden steps leading up to my house and I am impressed with the quality and functionality they offer. The size of 35 x 10 inches is perfect for the average step, providing ample coverage. The installation process was straightforward, and they stay on the wood without any need for additional fixtures.One of the standout features of these treads is their non-slip surface. The texture is designed effectively to prevent slips and falls, which is especially important in wet or icy conditions. Since installing them, I’ve noticed a significant improvement in safety on the steps.Durability-wise, these treads seem robust. They’ve held up well against various weather conditions, showing no signs of wear or tear.The pack of six is a great value for the price, providing enough treads for multiple steps. Overall, the Spurtar Rubber Stair Treads have enhanced the safety and appearance of my outdoor steps, and I highly recommend them to anyone looking to improve stair safety.
Tom K –
Surprisingly I couldn’t find anything decent at hardware or big box home improvement stores. Installed these on my wooden front porch steps and they work great.Pros: perfect thickness (not too thick or thin), included tape is sufficient length, strength, and grip.Cons: treads are not made of recycled rubber (quite inexcusable), instructions could be better (doesn’t mention taping the front bullnose, I recommend doing so for a tidier look).Suggestions for the Manufacturer: some colour options (brown would be nice), offer in deeper size (eg. 12 or 14 inches).
Nick –
I was looking for rubber stair treads for my stairs that are in my garage. I came across these stair treads which looked like something I may like but was not sure what was going show up at my door after purchase. Well I have now got the treads and they were and are absolutely great .Exactly what I wanted.For the price these rubber treads are well worth it.5 Stars for this product for sure
Lynn Ritchot –
This is a good product but that fact that they give you 2 sided tape to install it is not good, it will never hold up and keep this in place especially in the cold weather, so although I like the product alot Im not happy with the 2 sided tape for installation
Maria L. –
My husband installed these on our three-step patio surface. Easy to install; they have not budged in several months of different weather. Definitely good to avoid skids. So we are satisfied!