S&Z TOPHAND 36 in. x 84 in. Unfinished British Brace Knotty Barn Door with 6.6FT Sliding Door Hardware Kit/Solid Wood/Sliding Door/Double Surfaces/A Simple Assembly is Required (36, Door+J Shape)

Quality of material superb
Though typically not one to send reviews, when I find a really well engineered/designed product, I speak up. I bought these 2- 48″x84″ S&Z kits and have nothing but good things to say about therm. The entire kit was complete down to the last screw and washer. The pieces were very well machined and finished and fit perfectly. As I’m using these outdoors, I elected to glue the mortise and tenons (along with the screws). Everything else was as described in the directions. The one main challenged I encountered was getting the tracks mounted to the exact correct height. If clearance is critical for your job, use the actual door with hinges mounted as your guide. The only suggestion I’d make to the manufacturer is to switch from Philips head screws to Torx head, as it’s hard to keep the Phillips driver seated into the Philips screw head when they sink so deeply into the drill holes. I’d buy these again!!

Ended up being worth it!
Couldn’t beat the price so we didn’t end up returning for the below reasons: 2 boards came cracked with one being one of the major side pieces. We contemplated returning but didn’t want to wait weeks for new pieces so we used wood glue and waited another day to put together. Once I had it all put together and started screwing together,I realized they gave me the wrong door instructions/parts. Mine did not come with 3 inch lag screws to screw the door together and no wooden cover pegs. These we had to just purchase from the store (again, didn’t want to wait). The screws for the farmhouse 45 degree boards are too long and screwed right through the entire door onto the back side. So then we had to wait another day to go back and buy smaller screws. We have extra parts that were supposed to be for another door. Since we got the wrong instructions it helped tremendously to go to YouTube for help. The hardware installation part took longer than I thought and a lot of measurements to ensure even and level. Overall, I’m glad I saved money and bought this door. It was worth the trouble and beautiful results.

Don’t waste your time or money
Edit: 3/26/23, a week after this review I finally was able to hang my door, and I find out that my wood is warped. It doesn’t slide right and it hangs up on the stops. I am changing my two star review to a one-star review. Won’t buy from this company again.It has taken me a little bit to write this review because I wanted to give all the good things about this door it’s due. I purchased a 40 inch wide door.The door was very easy to assemble and the wood seemed like good quality wood. So that was the first thing I did was assemble the door. It was the easiest part of all of this. When I opened up the packaging for the hardware, everything seemed to be good quality. But as I laid the rail out for me to determine where it needed to go above my doorway, I realized that they had given me the bare minimum of railing for me to hang a 40 inch wide door. Realistically, if you have a 40 in wide door you need double that to clear your opening when you slide it back. I was given a 79 inch rail, that also had to have stops installed on each end, so I was already in the negative. I could have made it work and added a 12-in extension rail to it, but there were no extension holes drilled at the end of the railing. So in order for it to work with my door opening one end of the rail had to go exactly at the edge of my woodwork. Which means that the first hole that was drilled in the rail was seven and a half inches from there. So I wasn’t even able to grab a stud with the first lag screw because of where the placement of the holes were drilled. I called Amazon and told them that I was running into issues with the rail and that I needed the company to send me a longer one, I even offered to pay extra money to do that and I told them that I would send back their 79 inch rail. Amazon gave me the number to call S&Z’s customer service and for 2 weeks I tried to call and leave a message but the mailbox was full. Finally one day, I was able to leave a message. I gave them my name my order number and what I needed and I never heard a word from them. I tried to call them back for another week and still nothing. I called Amazon and told them I was having trouble getting in touch with them so they contacted the company theirselves and Amazon could not get resolution or a response from them either. Amazon offered a return and a refund for my trouble, but I had already put the door together, it seemed less of a hassle to try to figure out what to do with the railing then to try to figure out how to get the door apart and send it back. I could have ordered another rail but it would have cost me another $129 for a 7 ft rail, and at this point, it was the principle of the thing.I ordered my door in January of 2023 and it is now middle of March and I still do not have the barn door up.Because of where the placements of the holes are in the rail and the sheetrock anchors they gave me did not have a stop ledge on them, so when I put them into the wall and tried to screw the lag bolts in they just pushed back into the sheetrock. I did not want to use a header board to install this barn door because the header board would have come out past my trim mold and it would have kicked my door out too far. So I have finally found a half inch wide headerboard to use and I will attach the railing to that and hopefully I can get it hung this weekend.Oh, and the instructions to hang were useless.Would I buy from this company again? Probably not….NOT because of the quality of the door or hardware, but strictly because of the customer service of the company. If you are going to sell products in the United States through Amazon please make sure that your customer service is top notch, because that’s what we expect.