Wall-Mounted Glass Touch Panel LED Dimmer Switch Brightness Controller DC 12-24V for Single Color LED Strip Light – White

Quite a good dimmer!
I wanted a dimmer for the 24V LED strip lights I purchased. Having never installed any light strips before, and want to use a dimmer to control lights under cabinets above the counter in my kitchen. I looked around to find one to use as a wall switch. This unit appeared to be able to what I was looking for it to do, and the price was good. I ordered it, and installed it and the lights, and it works well. The touchpad is extremely responsive, and it can dim the lights very low without any issues I’ve read about using dimmers with light strips. I am really pleased with the dimmer, and will be ordering more to put light strips under the rest of cabinets. The main lighting design I am ensuing, is to use all low voltage wiring to wire all lighting throughout my kitchen and elsewhere. This allows me to run low voltage wires thru the walls, etc. to power the lights, and still use wall mounted switches and dimmers to look and operate like standard 120v units they are replacing. This dimmer fits my requirements very well, and works well.

worked for 45 days then quit
worked for 45 days. installed controlling a 750ma led strip and it only lasted 45 days of daily use. not really good for lighting. hard to “find” the on button in the dark. and usually you have to touch it 4 or 5 times to get it to come on. We have all solar direct current lighting in the house and test stuff to see if it lasts. we get nothing free and dont recommend this switch!And Amazon wanted me to rate it for brightness, thickness and ease of install!?!? How about ease of use, quality and durability? It would fail all of those.

12v circuit dimmer that works.
Ok, so I am wiring the lighting in my house off of 12v circuits. A lighting circuit powers a 200w driver. From there I go out to the switching. I looked for a lot of options, rotary rheostats and potentiometers, off the shelf slide dimmers and even LeGrandes Wattstopper commercial low voltage switch. NOTHING would both switch on/off full voltage AND dim. Only these guys. They are great. To date I have four installed and they are functioning perfectly. Sometimes the on of noise is obnoxious. The smooth face makes cleaning easy.I do wish that they start making these with multi-zone capacity within a single gang architecture. But that is another topic for another designer.A

Not a Good Buy for RV
This review is for: BINZET Wall-mounted Glass Touch Panel LED Dimmer SwitchSince 2019 I purchased a total of 11 of these for my RV.Since then, all have failed. I removed the last ones today.Here is my summary of pros and cons for this item:Pros: They look great! When they work – They work great. They offer full dimming and control of LED lights.Cons: They will eventually fail. They sometimes come on at random. They are static electricity sensitive. The wiring terminals are cheap, too close together, and do not work well. There are (4) terminals that must be connected – Not (2). The dimmer controls the NEGATIVE terminals, not the positive. Be very cautious when installing these. The terminals will work for one insertion only with a solid or solder tinned wire only. The dimmer has NO ESD or static protection on the circuitry. This makes it vulnerable to any static. Any surge on the RV ground WILL fry these as they are negative referenced. When they go bad, they default to being ON, which, if unattended, will kill your battery. These resulted in MANY wasted hours and dollars.

Easy to connect and works well. Dimming is very gradual at the brightest end and tails off quickly on the lower end, like a lot of LED dimmers. It would be nice if there were an indicator or some tactile mark in the glass or even if the ‘slider’ reacted when off. It can be difficult to find the exact touch spot to turn on in the dark.

Facil de usar y conectar