Washing Machine Foot Pads for Anti-vibration and Anti-Walk | Washer and Dryer Anti Slip Mat with Rubber Technology | Ideal for Vibration Reduction and Shock Absorber | Rubber Isolation Feet Set of 4

$16.99

Added to wishlistRemoved from wishlist 0


Price: $16.99
(as of Feb 14, 2025 05:07:51 UTC – Details)


Knivel Antivibration Pads for Washer and Dryers
This will prevent any “walking” or skidding of your washer. If “walking” of washer is your main problem we highly recommended purchasing. Washer Pads Absorbing Shock provide vibration-damping support for both front and top loaders. Also useful for stackable units, pedestal units, refrigerators, upright freezers and chest freezers.

Product description
– Dryer Pads can as a non-slip pad for furniture and electrical appliances to avoid the damage of floor . Vibration pads is very light and thin that won’t take up your home.
– Place in the refrigerator – washing machine and other heavy machinery.
– Keep the bottom of the object ventilated against moisture rust.
– Your Anti Vibration Shock Absorbing Pads in a pack of 4, enough to cover each corner of your appliance. If your washer and dryer are both giving you trouble, please be sure to purchase 2 packs!
– This anti-vibration pad is a good helper to make your life quiet and comfortable.

Notice:
1. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please consider this before the purchase.
2. Please allow 1-2cm differs due to manual measurement.

Package Included:
4 X Knivel Anti Vibrant pads for washing machine.

Tags: work table wood drier sticking combo stabilizer pedestal heat floor protectors high coefficient of friction
✅ SHOCK ABSORBER ANTI-SLIP PADS – The Knivel Antivibration Pads are mainly for washing machine shock. The Vibration dampening reduces the noise caused by a non-stable washer or dryer. Doing laundry will become a quiet and pleasant task. No more noise from your machines.
✅ GREAT QUALITY! – Great gripping design that prevents washers & dryers from any type of vibration works on any type of flooring. This product is made of quality rubber that has very good vibration absorbing abilities. This will prevent any “walking” or skidding of your machines. Non-marking, Knivel anti vibration pads eliminate scuffs, scratches and scrapes, effectively protecting any floor surface, including hardwood, laminate and tile floors.
✅ SET OF FOUR – Each set comes with four Knivel anti vibration pads, one goes under each leg or foot of the washer or dyer. If you want to use on both your washer and dryer, you will need two sets.
✅ EASY TO INSTALL – No tools or messy adhesives required. Simply lift each corner of the machine and slide the noise absorbing pads into place. To make it even more convenient, our pads are designed to fit all standard washers and dryers with four legs. It’s very easy to stick our rubber feet. Don’t skip leveling the machines!
✅ NO VIBRATION, NOISE AND WALKING – Providing stabilizing support for large appliances including washing machines and clothes dryers, Knivel anti walk pads reduce vibrations, noise and slipping for smooth, quiet operation. Shock absorbing, the textured anti-vibration pads effectively eliminating ‘walking’ appliances. This set contains four Pads to cover every corner of a washer or dryer.

Customers say

Customers find the product effective in reducing vibrations and noise from washing machines and dryers. They find it useful for controlling movement caused by water weight and consider it an inexpensive addition to balance washers and dryers. Many customers appreciate the ease of installation and balance, though opinions differ on its sturdiness and size.

AI-generated from the text of customer reviews

9 reviews for Washing Machine Foot Pads for Anti-vibration and Anti-Walk | Washer and Dryer Anti Slip Mat with Rubber Technology | Ideal for Vibration Reduction and Shock Absorber | Rubber Isolation Feet Set of 4

0.0 out of 5
0
0
0
0
0
Write a review
Show all Most Helpful Highest Rating Lowest Rating
  1. Viktor S.

    Inexpensive add to balance washers and dryers
    I purchased these to help balance my washer and dryer in an uneven floor. They work great.

    Helpful(0) Unhelpful(0)You have already voted this
  2. Matthew

    Anti-Vibration
    Got these because my washing machine’s legs were rusted and not level any longer. These foot pads have helped to stabilize the machine and the vibration is gone. Worth every penny.

    Helpful(0) Unhelpful(0)You have already voted this
  3. John R.

    Took Several Tries at Leveling
    These Washing Machine Foot Pads for Anti-vibration and Anti-Walk were very easy to install for both the washer and dryer. I have a pair of Samsung front-loaders located on vinyl tile in an unfinished basement next to a utility sink. For the washer, after several attempts at leveling, we’ve managed to achieve less than half an inch of side-to-side movement with small loads. Surprise, the bigger the load the better — as in zero to one-eighth inch of movement for a full heavy load. The dryer has never walked, but does rock side-to-side significantly (initially) as the wet load size increases then decreases to zero as the load dries.

    Helpful(0) Unhelpful(0)You have already voted this
  4. Melissa Fuentes

    Great
    Used to level a dryer. Works great.

    Helpful(0) Unhelpful(0)You have already voted this
  5. Marilin Gondosne

    Tapas
    Más o menos no son tan buenas muy superficial

    Helpful(0) Unhelpful(0)You have already voted this
  6. Robyn Restel

    Stacked Washer/Dryer
    I recently moved into a place that has a stacked washer and dryer. Problem was the dryer kept moving around on the top of the washer in a cubbyhole enclosed on three sides when the washer was spinning. It would bang against the wall and rattle the dishes in the kitchen and if I didn’t hold the dryer still during the spin cycles it would even slip off of the washer to one side or the other. My friend suggested building a shelf in the cubbyhole to set the dryer on which sounded like way more than I wanted to get in to. I wanted to glue the feet onto the top of the washer. We then found these foot pads. I received them quickly, and we got them under the feet (with quite a lot of difficulty on the back feet because you couldn’t reach back or have room in the cubby even for leverage. Otherwise it was a cinch to put the feet of the dryer into the pads. Much to my disbelief and delight the pads work like a dream, it’s now more quiet and the dryer stays completely in place. What a marvel.

    Helpful(0) Unhelpful(0)You have already voted this
  7. ArtL

    Installed on my Samsung top load washing machine
    Added these to my washing machine , balancing rubber legs. Added padding and lessened vibration, on tiled floors

    Helpful(0) Unhelpful(0)You have already voted this
  8. andrew

    Catastrophic Failure at day26
    My Whirlpool Duet Washing machine walked across the floor. No matter how precise I leveled the leveling feet, it would “walk” or just move across the floor. A Washing machine is heavy and a front loader rotates counter clockwise. This caused the washer to move in a constant direction counter clockwise on the floor. With clothes and water, the machine is heavier.I installed these anti vibration pads which was a simple task. Using a board I was able to lift a corner up onto the a pad and doing this at each corner I was able to easily position the pads under each foot.. I marked the location of each pad and started a load.The machine did not move at all from its position. It was quieter. After the first week and six loads, I thought I had found a solution. For 26 days the machine did not move.On the 26th day I went to remove the clothes from the washer and it has moved seven inches. I found this hard to believe – no movement for 25 days and now this huge movement. I removed the four anti vibration pads to see how the failed.The pads are not solid, but have a web underneath. This web is a “+” within a circle. The web is to give support to the center, but in this case the web had rolled over in a counter clockwise direction. The rubber is not a super hard rubber (allows for absorption of vibration), but this is its downfall, the rubber is not strong enough to resist the twisting force between the floor and the machine.Would a solid bottom work better? This would reduce the chance of the base center material from failing and collapsing downward, which would then lift the circumference material from contact with the floor.I have ordered a solid bottom anti vibration pad and hope this will last longer. It would be nice if the Mfg identified the durometer of the material used. I would not want a super had rubber, but one that can grip the floor evenly.

    Helpful(0) Unhelpful(0)You have already voted this
  9. Samer Ali

    Good product

    Helpful(0) Unhelpful(0)You have already voted this

    Add a review

    Your email address will not be published. Required fields are marked *

    Washing Machine Foot Pads for Anti-vibration and Anti-Walk | Washer and Dryer Anti Slip Mat with Rubber Technology | Ideal for Vibration Reduction and Shock Absorber | Rubber Isolation Feet Set of 4
    Washing Machine Foot Pads for Anti-vibration and Anti-Walk | Washer and Dryer Anti Slip Mat with Rubber Technology | Ideal for Vibration Reduction and Shock Absorber | Rubber Isolation Feet Set of 4

    $16.99

    Best Deals for all new
    Logo
    Shopping cart