Comments on: ZEKOO 7.5FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Barn Door Bypass Hardware Kit, Flat Track Roller, Low Ceiling (J Shape Hanger)

By: Janette Williams

Janette Williams — Sun, 16 Feb 2025 23:06:36 +0000

The product seems to be very sturdy and runs well on the rollers. Only problem being we should have had larger doors as the overlap is 6â.

By: Amazon Customer

Amazon Customer — Sun, 16 Feb 2025 23:06:36 +0000

Good product.

By: T2shay

T2shay — Sun, 16 Feb 2025 23:06:35 +0000

Very heavy duty
I bought this thinking it wasn’t as heavy as it is. This is super great quality but i had to return it i was trying ro uae old closet doors which are hollow and they are too flimsy for theae brackets. Great for real solid wood.

By: DP

DP — Sun, 16 Feb 2025 23:06:35 +0000

Great item and high quality
Worked great to build sliding barn doors for my large closet. Rolls smoothly and looks great.

By: Lisa Greeson

Lisa Greeson — Sun, 16 Feb 2025 23:06:35 +0000

Very helpful seller
Had a slight problem with the installation. Seller was more than helpful. Very toquick to respond to messages and followed up with messages to make sure all was well. Would buy again.

By: John Anderson

John Anderson — Sun, 16 Feb 2025 23:06:35 +0000

Barn door kit.
Quality products, fast delivery.

By: Alfredo

Alfredo — Sun, 16 Feb 2025 23:06:35 +0000

good price and quality

By: Alison

Alison — Sun, 16 Feb 2025 23:06:35 +0000

I would love to give this a 4.5 star if I could because it was almost perfect. It was easy enough to install provided that you have the right tools (seriously, listen to the instructions, youâll want a socket wrench!). We love the way it looks and it is super sturdy. The reason Iâm taking off one star is for two reasons: 1. The wall anchors that this kit comes with may as well be butter. We tapped them gently with a rubber mallet into spots that were completely clear of studs, and they were bending all over the place. We ended up buying our own which worked way better. 2. The instructions say to measure the door height + 1 11/16th inches onto the wall and place the centre of the holes on the track at that spot. With this height, we discovered that thereâs no clearance between the door and the floor once itâs all attached so we actually had to sand the bottom of our door to make it slide properly. Thankfully we have carpet so not a huge deal, but youâd want more clearance on hardwood. In hindsight I would have done closer to door height + 1 15/16th inches instead.Overall, happy with this purchase and it fits our room perfectly!

By: lisa lc

lisa lc — Sun, 16 Feb 2025 23:06:35 +0000

I did it myself 54 (f), I took apart an old 2 door cabinet with an open shelf, mid 70’s home owner special made of plywood… awful.I painted inside and put up Rubbermaid wire shelving unit, for towels and sheets ect…First time instructions were actual easy to read and see step by step.My only problem was the wall above the closet was just paneling, so I had to add a wood header and glued and used a air gun to nail it up, drilled the holes and used the plugs that came with it. Everything was level but one door I had to cut off a bit at the bottom as the floor went up closer to the wall. Old house nothing is straight. Still need to add trim around the opening, but took the photos to shower the hardware. Nicely wrapped and packaged. I ordered the 5 ft one and it came in 2 2.5 ft rails. Why not just a 5 ft?Very easy to install, I took my time and did a little bit each day over 4 days, but could of got it up by myself in 2 days, but wasn’t in a rush. Just make sure you have a laser level when setting your line for installing the top rail.I would order from them again.Just finished the trim around the opening looks better now

By: Ms Sly

Ms Sly — Sun, 16 Feb 2025 23:06:34 +0000

Great hardware
This hardware worked out great. It’s very heavy duty and made well. We converted used sliding shutter patio doors into barn door sytle. I bought the 9 ft single bypass track and my opening is 8 ft wide, each door is 48″ wide. The only small issue was the bolts that are used to mount the bracket to the doors were too long for a 1 inch thick door. The company mailed me shorter ones very quickly and for free; however we were so anxious to start the project, we went out and bought shorter bolts. Since we had to remove casing/a frame from the old shutter doors that came with the house, we had to install new casing around the patio door opening. We used left over 5 3/4″ baseboard that our flooring installer gave us. It worked out perfect. Thanks to other reviewer pictures and tips to give us the idea. At minimum we had to mount a board at the top to ensure at the end, the rail was mounted into studs. Because we initially did not plan to put these doors up as barn door syle, they hang a little higher but my husband was creative on making a tall enough door guide. He mounted the door guides that came with the kit onto a block of wood and it’s also working out fantastic. It’s a must to use a door guide for our doors because the weight was pushing them inward. I also bought the handles off Amazon too.Tips: Don’t use the anchors, install into studs – you might need to mount a board up to make this happenBuy shorter bolts or pre-order from the company ahead of time if necessaryTake your time, measure carefully, read the directions carefully and look at the pictures. Trust the measurements they provide and look at the pictures because those help with making sure which is front, back, top or bottom to certain pieces. Make pilot holes first to prevent splitting. We also used masking tape to plan where the holes where go.Cons: bolts too long, but easy fixOverall this project took us a couple days due to prep work. If no prep work needs to be done, I would say installing the kit is a couple hours work.