Fredbeck 32×84 inch White Barn Door with 5.5FT Sliding Door Hardware Kit Included & Handle,Solid,MDF,PVC Surface,DIY Assembly,5-Panel,Fit 29in-30in Opening

Perfect Fit
Doing a full kitchen remodel which included replacing the laundry room door. Had a very specific size needed to fit. This door is perfect for our needs and is heavier and nicer than expected. Putting it together was easy for me since I do a lot of DIY projects. The only thing I did notice is that the gap between the floor and bottom of the door is less than 3/8” and that’s following the install directions and double checking measurements. It is solid and rolls super smooth.

Nice doors!
These doors are quite heavy, but they were well packaged and arrived undamaged, much to my surprise! I am taking off one star as the directions were not good, the hardware was not labeled and when we put the 2 pieces of track together, they did not line up straight. We did not realize that the doors themselves do not come assembled. Those were actually the easiest part. Well, except that the directions had B3 & B4 reversed, which we didn’t realize until we went to screw the sides on and there were no holes. We then had to take the door apart and switch the pieces. There is also no information on using a header. We used a 1×4 and watched YouTube videos. The left side extends more in order to hit a stud, and the right side is up against a wall. The doors ended up being an 1” higher off the carpet than we wanted, even though we used their measurements. My husband can fix anything and we have done many home improvement projects together; but if you are a novice, this might not be for you. But the doors are nice and seem to be well made and price wasn’t too bad.

Solid Door – Preplan Installation
For the price, the door is going to be unmatched, this review is going to be for the (2) Doors – 24″ Inch / 84″ Inch. Mostly I’d like to impart some information that might save someone some time. I highly suggest you check every inch of this product before putting it together, one of the panels was screwed up and I had to call the company for one. There is absolutely no extra anything in the box.Needed: You absolutely need a buddy, a large level, drill with hex bits, and some patience.1. By a header board, I suggest a 8FT – 6″ – 1″ Thick OAK with about 10 Lug Screws. Screw those suckers into only STUDS after doing the recommended measurements. Prior to screwing that in, I suggest you measure out the railing on the board and ensuring it is level. Then screw the board in.2. Since you wisely measured out the rail and the six screw ins prior to installing the header board, you will be able to quickly put them up and level them out. I suggest only putting one rail up and then putting one door up to ensure the height is what you want. If it is, then repeat for the second rail. If it isn’t, then move the rail down on the header board.3. The guiding fixture on the bottom (to prevent swing of back and forth) sucks. I went out and purchased (4) smaller black L Brackets. I put felt on the inside of the L Bracket and put two in the front and two in the back to prevent swing. Technically you are supposed to screw those fixtures or the L brackets into the floor. Screw that, just get some command strips so you don’t ruin the floor.4. If you have a cat, dog, or curious child, these doors open really easily. You can easily screw in some type of hooking apparatus in the front (not pictured in my pictures) or what I did, put magnets on the inside of the doors by the handle so they keep closed or close easily.Anyone saying they screwed the rail directly into studs without a header board must have a perfect home. It can be done, but may luck be in your favor. Do yourself a favor, get some nice oak and put the header up. I will stain mine (easy to take down the doors once the whole thing is installed) and it will look good.

Broken and missing
Item came broken and missing parts for assembly. Amazon would not get refund. Went in circles on phone with Amazon and manufacturer no help. Would like a refund or replacement. DO NOT BUY. WASTED 350$ and HAD TO GO IN TRASH