VIVO Electric Triple Motor Height Adjustable 3 Leg Corner Desk Frame, up to 300lbs, Sit Stand Ergonomic L Shaped Frame Only, Black, DESK-V130EB

Very sturdy, nicely balanced, well built, and quite
These legs are amazing! I live in a mountain area and my home slightly slanted, luckily the legs have adjustable knobs that allowed me to perfectly balance them. I used a couple butcher blocks stained black, and the screws that came with the legs locked them in perfectly! The included brackets to secure 2 table tops together where a god send. It’s really seems like manufacturer truly cares because they thought of everything I need before I realized I needed it. I was worried that the heavy butcher blocks would sag or droop. especially in the corner where it seems like there’s less support. I’m happy to say, the desk is solid! And I’m a big guy, leaning my weight on the desk isn’t an issue at all. As long as the legs are properly centered with the top, it’s amazing!The motor is quiet. I work from home in a call center like job, I can adjust the desk mid call and the sound never gets picked up by my mic. Granted, the mics provided do cancel quite background noises, but a motor that’s quite enough to be canceled blows my mind. I have a lot on my desk, and legs are able to extend to the fullest length. Whether the desk is low, raised, or while moving, there is no rocking, no vibration, or shaking. Everything stays in its place. It smoothly glides up and down, with no abrupt jerky stops. It’s well worth the money. I appreciate it, and my back does too!

Great desk so far though has a big drawback for some
First off, my top is butcher block in two sections. 30″x60″ and 30″x48″. I like the option to sit in the corner and rest my arms on each side of the “L” for comfort and support during long days. I liked that it came with steel plates for underneath the 2 wood pieces to better support the top. The other thing I wanted to do was add casters to the base So I could easily move the desk out occasionally to clean, etc… The screwed in legs are M8-1.25m, so getting casters was easy. Went with some steel heavy weight bearing ones. This is where I found the desk’s weakness. In the back corner leg (without the “T” base), the threaded mount to accept the screwed in adjustable leg (at the floor) is displaced below the plate. This offset makes that part weak. When I put a caster in it, that part bent. The caster post/bolt was fine. This is when I pulled off the bottom plate held on by 4 hex screws and found something problematic that doesn’t affect the other legs. The threaded adjustable leg mount is a compression fit piece and isn’t welded. The compression joint failed and bent. That means even slightly pulling the desk with it’s standard legs would bend that mount. Who doesn’t occasionally move a desk? Thought about just welding it but thought I can do better by just getting a T base foot that’s on the other legs. I looked for vivo desk parts for this desk which would have the T base foot with no luck. I then found another site online which has a similar sized T base foot at up-lift desk. the v1 24″ T foot worked great for 35 bucks. Had to drill out the 4 screw holes as the vivo plate holes didn’t exactly match. Now I have a great desk that spins on the floor with no ill effect. Too bad vivo doesn’t supply this foot by default. I still rate this desk a 4 star as everything else about the desk is solid. If you don’t drag it, you’d probably be fine.

Was planning to buy two of them to have 2 desktops making a U shape.. Only regret not buying two of them right of the bat

This L-Shape desk is relatively economical compared to similar products from other brands, and the material of the metal used is pretty sturdy. However, this desk does not offer the functionality to turn in both directions. This means that you have to do some imaginary metalwork and make sure the desk can fit and turn toward the corner of your choice. Some other brands like VWINDESK VJ301 L Shaped desk can turn in both directions which is more flexible but more expensive. If you did the wrong calculation before the purchase and found that the desk does not fit after the delivery, you may have a hard time for the seller to offer you a return label since they do not like customer returns. As a result, remember to do the measurement and calculation carefully before the purchase!