XtremepowerUS 3000BPM Demolition Chipping Jack Hammer
$94.95
Product Overview
The XtremepowerUS 3000BPM Demolition Chipping Jack Hammer is a high-performance, professional-grade electric breaker engineered for demanding demolition and construction applications. Featuring a robust 1000-watt motor capable of delivering up to 3000 blows per minute (BPM), this corded jackhammer excels at breaking through concrete, asphalt, masonry, and other hard surfaces with consistent power and precision. Whether you’re working on site preparation, foundation removal, utility trenching, or general chipping tasks, this tool offers the reliability and impact strength needed for both commercial contractors and serious DIY enthusiasts. Its ergonomic design reduces user fatigue during extended use, while the included accessories enhance versatility across multiple job types.
Key Features
- Powerful 1000W Motor: The 9.1-amp motor generates up to 3000 impacts per minute under full load, enabling efficient demolition of even the toughest materials without excessive strain on the operator.
- Dual Chisel System: Comes equipped with a hex bull point chisel ideal for piercing and cracking, plus a flat chisel cutter perfect for smoothing and shaping concrete and stone surfaces.
- Universal Hex Shank Compatibility: Designed to accept standard 5/8-inch hex shank bits, allowing users to expand functionality by using aftermarket chisels for specialized tasks.
- Adjustable 360-Degree Side Handle: The swivel lock side handle can be repositioned or detached entirely, providing improved control and maneuverability in tight or awkward spaces.
- Rugged Storage Case: Includes a heavy-duty blow-molded case with reinforced handles, offering durable protection and easy transport of both the jackhammer and included chisels.
Technical Specifications
- Power Input: 1000 Watts
- Amperage: 9.1 AMPS
- Voltage: 120V / 60Hz
- Full-load Impact Rate: 3000 r/min
- No-load Speed: 3000 BPM
- Tool Weight: 20 lbs
- Bit Type: Hex Shank (5/8 inch)
- Power Tool Type: Corded Electric
Benefits & Use Cases
This demolition jackhammer is built for efficiency and durability in environments where breaking up hardened surfaces is a daily requirement. The combination of high-impact force and precise control makes it well-suited for medium to large-scale projects such as removing sidewalks, breaking apart concrete slabs, trenching for utility lines, or installing ground rods. The dual chisel setup allows seamless switching between piercing (bull point) and flattening operations—no need to pause and swap tools mid-task. The lightweight yet resilient construction helps minimize operator fatigue, especially during prolonged use, while the ergonomic D-grip ensures comfort and secure handling.
The adjustable side handle enhances accessibility in confined areas, making it easier to work vertically or at angles where standard positioning would be difficult. Ideal for professionals in landscaping, construction, facility maintenance, or municipal work, this jackhammer delivers reliable performance when you need dependable demolition power without the limitations of air-powered alternatives. Because it’s corded, it provides uninterrupted operation as long as access to a grounded 120V outlet is available, eliminating concerns about compressor noise, hose kinking, or air pressure drops.
Important Notes
This tool is intended for indoor and outdoor use only when connected to a standard 120V electrical circuit via its integrated power cord. Always ensure the outlet is properly grounded before operation. Never operate the jackhammer in wet conditions unless specifically rated for water exposure—this model does not carry an IP rating for moisture resistance. Personal protective equipment (PPE) including safety goggles, heavy-duty gloves, and hearing protection is strongly recommended due to the high noise and vibration levels generated during use.
Package contents include: one XtremepowerUS 1000W electric demolition hammer, one hex bull point chisel, one hex flat chisel cutter, and one impact-resistant storage case with handles. No-load speed may vary slightly under maximum operational load depending on material density and ambient conditions. For optimal performance and longevity, regularly inspect chisel tips for wear, clean debris from air vents, and store the unit in a dry environment inside its protective case when not in use.
10 reviews for XtremepowerUS 3000BPM Demolition Chipping Jack Hammer
Add a review
Related Products
OJQ 8 Pack Hexagon Wall Light RGB Panel – Smart APP RGB
Twinkly Squares Starter Kit, RGB LED Panels Kit, Including 1
3-Speed Cordless Mini Drill Pen With 8 Small Drill
AmaniSofia –
Found a 3 inch chisel that works.
UPDATE : After many trials I found the only accesory chisel that fits in this hammer. It is theChampion Chisel, 17mm Harbor Freight Shank, 3pc Chisel Set. You really only need the 3 inch one but this set comes with all three. You can buy just the three inch one elsewhere but hae to wait for shipping. Made quick work of a bathroom demo. Tiles came up like butter and easy to remove all the thinset leaving the foundation unmarked. The company should offer more accesory chisels. I would love the shovel chisel to dig dirt.I was a little hesitant buying this because it is so cheap. However this is a great item. It is very sturdy and well made. It comes with two bits. It had not problem demoing some concrete steps. It paid for itself after the first few minutes of use.I also used it to tear up a bunch of patio tile. It went through it like butter. I would prefer if it came with a wide floor chisel. You need that if you want to rapidly remove some tile without damaging the underlying concrete. I bought a floor chisel separately. I previously had a harbor freight demo hammer that last through just one kitchen demo and cost more This one seems to work better and looks like it will last much longer. Remember to add grease when it runs out. It comes pre-filled with grease for your first use. This is perfect for the DIYer but I think even a professional remodeler would get good use out of it.
TheDom –
An inexpensive jackhammer that gets the job done
At the time I purchased this tool, it was $99. For that price it’s a pretty amazing piece of equipment. It’s definitely heavy duty… it probably weights at least twenty pounds. That’s a good thing though; you can let the weight of the tool do some of the work for you when working downwards as you’ll most likely be doing. If you have to work where you have to hold the tool up, then it sucks a bit, but I don’t know if there’s a light jack hammer out there. It comes with a decent case as well. A couple of small issues, after an hour or so of concrete work the chisel tip is pretty worn. Perhaps that’s normal, but I imagine this isn’t being shipped with top of the line chisels either. Again, at the price, the fact that is comes with two at all is a bonus, and even in its worn state the chisel is still busting through concrete with ease. The manual is a typical Chingrish mess. But it is at least thorough.Honestly. if you’ve got a light or medium sized demo job, you can’t really go wrong with this tool that’s probably cheaper than a day’s rental of one from your local hardware store.
CWG –
Good choice
We have in-ground water heating system (72 y/o house). Piping is buried in 4″ of concrete and we have sudden breaks (walked into 2″ of water in front room – 3 times!). We’re low income, and very high HVAC costs are mostly for CAREFUL removal of the concrete. So I (a woman) learned to use it and it’s kind of fun – aside from the noise, vibration and dust.
Doug –
Best tool ever!
(Review by Doug’s wife):I LOVE this tool. I was trying to dig a trench in sandstone/clay with a mattock and long digging bar (and a lot of tears) when a contractor neighbor suggested I get a demolition hammer. I searched and came up with this tool and have found it useful for so many projects. It’s heavy, so digging the drainage trench was hard, but I was able to complete it in a little over two weeks. The drainage contractor told me it would take me months and wanted to charge me $4,500 for the job. It ripped up ceramic floor tiles in minutes, and at an estimate of $10 per sq ft to demo tile from the tilers, this tool is saving me a fortune. It totally removed a massive amount of leveling cement previous owners used to cover up rot in a bathroom, and easily broke apart some cement footings for an old deck. And it breaks up soil for planting in this horrible, horrible clay and sandstone so I’ll be using it for a long time to come. It has paid for itself many times over. I would buy this again in a heart beat.
Jim Elliott –
It gets pretty hot, after 30 minutes or so of continuous …
I bought the hammer to chip out concrete – I am extending the master shower (a 2′ x 5″ extension). I also had to move a pipe that was unexpectedly found coming up in a wall which meant making a 5″ wide by 7′ trench through 4″ of concrete. The hammer performed perfectly and is much easier to control than a standard jackhammer. It gets pretty hot, after 30 minutes or so of continuous use, but seems to stabilize and is none the worse for wear. I have used it for a couple of hours at a time. I recommend it and would buy again – it is a great value for the price. It comes with an extra set of motor brushes which I’m sure will come in handy some day.Full disclosure – while I am not a professional contractor, I have done numerous projects including remodeling, guest house, two restaurant bars and a 60′ x 50′ covered outdoor patio.
Etienne Ringuet –
I was about to rent one of these but I knew I would need one a few times for my project. At that price, it’s like 2 days worth of rental so I decided to try it. It works fine. I broke a concrete slab to run plumbing in my basement. I used it to remove 300 sqft of tile. I broke down a 3×3 4 inch thick slab of concrete that I wanted to redo. This hammer did it all. I figured if I worked for 2 days I would be ahead from renting and I wasn’t disappointed.
David M –
Works great for smaller projects! Actually worked better than expected, I would highly recommend for home renos easily paid for itself after 1 use and comes with 2 bits!
julia r. –
Bought it as a birthday present and he was pleased when he used it.
Cody Reimer –
If you’re looking to break up ceramic tile, this is the tool for the job. I’m sure it has a ton of other uses as well, but that’s what I used it for and it ended up being a very cheap alternative to smashing the tiles up by hand. It saved me a lot of time!
Amazon Customer –
This is working out very well for those small to medium sized ‘around the house’ jobs. Very nicely packaged, too! Very pleased with this purchase.