ZEKOO 7.5FT Single Track Bypass Sliding Barn Door Hardware Kit for Double Doors, Barn Door Bypass Hardware Kit, Flat Track Roller, Low Ceiling (J Shape Hanger)

Nice application, looks great with doors
Great door hardware, easy to install

Very sturdy, but do a mock up first
I am really pleased with the quality of the hardware, although it would be much better if the rail came in one solid 10′ piece instead of a couple of fives with a bracket. I understand that shipping out a 10′ long package would add extra costs, but trying to install the full length rail connected by a mending plate was a challenge. Even with a helper, the connecting plate would get bent went we tried to place it above the closet to mark the attachment holes. I would HIGHLY RECOMMEND that you experiment with a mock up of the doors after you’ve attached the rail–attach the hangers to a piece of plywood or something and hang it from the rail. I found that if I followed the instructions on the set I received, the interior door was 1/8 of an inch higher than the outer door, and it was so close the rail that the anti jump bumper couldn’t be used. In other words, if you drill the holes for the hanger screws on the interior doors the 1 9/16″ and 3 9/16 distances from the top of the door, the interior door will be 1/8″ higher than the exterior door. Because I used scrap wood before drilling into my doors (aged cedar from an old fence), I was able to catch this discrepancy before I drilled 7/16 holes in my real doors. Maybe this was a quality control issue, but I am so glad I did a mock up before drilling holes in my doors–it would be a difficult mistake to recover from.Just installed the second set of hardware, and am happy that I kept the notes from the first install. I remembered to raise the hanger screw holes on the inside (straight) hangers up an eighth of an inch so the bumpers would clear. This time those holes made the gap for the bumpers a little wide, so I just used a couple of washers to make sure the bumpers did their job to keep the doors from jumping the track, although I will say that this set of doors is pushing the weight limit of the hardware. Even still, the rollers move flawlessly on the rails. I have two more sets of closet doors to go, and I will totally use this hardware.I have installed the other two sets, and the screw holes were not as out of whack as on the first two sets, another reason to DO A MOCK UP. Install the hardware and attach one of the hangers on a strip of plywood about as long as your door and adjust accordingly.Update:I’ve seen some negative reviews about this door not accommodating 1 inch doors. IT DOESN’T, which the product description does mention. Maybe it should be in the main description, but you should first read the specs before you buy anyway. I didn’t, AND the first time I purchased them I had made my door TOO THICK, and to hack away at my 2×4 frame to get the total thickness of my doors to less than 1 3/4″ max thickness (circular saw + multi tool+HOURS, I’ll had a photo), because I had already firmly and forever attached the reclaimed pine fencing boards to the frame. Once I learned that lesson and installed my doors, I appreciated the design of this hardware.Some reviewer have complained the doors don’t hang perpendicularly. I have installed this hardware on 4 sets of double single bypass doors–(3) 8 foot wide door sets and (1) 6 foot wide door sets, and they are super heavy. I live in an oldish house, where nothing is plumb. My doors tended to free hang slightly into the closet, so I installed only the interior floor guides to force them out.. I used a level or carpenters square to make sure the doors were perpendicular to the floor and screwed the door guides in exactly where they would force the doors to be perpendicular. The attachment holes for the guides allow some positioning flexibility. There is no visible rub damage because they are on the inside of the closet, and because of the overlap, you can’t see them, and they open and close smoothly. I included some pictures from my initial review.Update: I am really happy with the quality and customer service from Zekoo. We have just installed 3 sets of the double bypass door hardware and they could not have been more communicative. This is a company that really wants to please its customers, and the price for the value couldn’t be better.

Great item and high quality
Worked great to build sliding barn doors for my large closet. Rolls smoothly and looks great.

Barn door kit.
Quality products, fast delivery.

I would love to give this a 4.5 star if I could because it was almost perfect. It was easy enough to install provided that you have the right tools (seriously, listen to the instructions, you’ll want a socket wrench!). We love the way it looks and it is super sturdy. The reason I’m taking off one star is for two reasons: 1. The wall anchors that this kit comes with may as well be butter. We tapped them gently with a rubber mallet into spots that were completely clear of studs, and they were bending all over the place. We ended up buying our own which worked way better. 2. The instructions say to measure the door height + 1 11/16th inches onto the wall and place the centre of the holes on the track at that spot. With this height, we discovered that there’s no clearance between the door and the floor once it’s all attached so we actually had to sand the bottom of our door to make it slide properly. Thankfully we have carpet so not a huge deal, but you’d want more clearance on hardwood. In hindsight I would have done closer to door height + 1 15/16th inches instead.Overall, happy with this purchase and it fits our room perfectly!

Good product.